pins loose!

[MrMcChicken]

hello, the pins of my green lasermodule are loose. how can i repair them?

 

[lasersbee]

Which pins....
Pics would be nice....

Jerry

 

[SerpantSlayer]

Which pins....
Pics would be nice....

Jerry

perhaps the pins between the driver and module?

 

[Lase]

perhaps the pins between the driver and module?

But are they loose on the driver or loose on the diode?

Sounds like a solder joint has broken. Post pics so we can better see the problem.

Lase

 

[jeffreythe00]

If you are talking about the pump diode's pins. It should be as easy as touching the diode pin to the soldering pad using a soldering iron.

 

[MrMcChicken]

the pins inside the diode are loose. it i able to move them. the module look like a deal extreme or o-like module.

 

[lasersbee]

If it is the pins coming out of the Laser Diodes case there
are 2 options...

1) if the Laser is still working you may be able to mechanically
solidify the connection with some high temperature non conductive
Glue/Epoxy.

2) if the Laser does not work... Get a new Laser


Jerry

 

[MrMcChicken]

the laser is still working. i hope i can fix it. is it possible to replace the ir diode?

 

[Blord]

Why fix it if it is still working ? The loose pin is maybe the dummy pin and it has no concern for the working of the laser.

 

[lasersbee]

Like I said in my 1st post...
A photo showing the lose pin would go a long way..


Jerry