Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

JETLASERS GB #6 Phase Two- make your choices

Joined
Apr 2, 2009
Messages
10,662
Points
113


DHL JUST CALLED!! afaik OUR ENTIRE ORDER will be here later today 10/24. OOPS!!! I spoke too soon-box #1 IS here but the box containing our glasses is still coming.
Metering pics will be sent to all via yr private email(if you sent it to me at my gmail addy(hakzaw1) if in doubt send again along w/ yr mailng addy. If all looks good you can send your shipping cost to me then as a personal/payment owed for service. (my PP is snapplz also a gmail acct)

The box shipping from China was $100 so we split that 8 ways= 12.50 per laser. The domestic charge varies by size of your box needed. The, BTW, glasses will not fit in small box. I add only 1$ to all this for gas cash to make the 10 mile drive to the PO.
Insurance-tracking-2/3 day delivery- you will be lasing before the weekend for sure.
**************************************

EDIT UPDATE- the list has grown and the time to make your selection is here. SO CHOOSE AND SHOW ME THE MONEY!! PM ME for my mailing address for your USPS MO-bank check or personal check(that needs to go out asap in order to clear my bank)
If you have gotten a price different from the GB price list in post #2 or want a laser not listed I need you to copypasta your PMs from Gray and PM/fwd that to me. That is the only way to be sure of no mistakes.
Once the majority has chosen and we now move to phase three: the collection of the funds(NOT via PP-OK?)

If anyone has questions about the method of payment plz PM me.

note: unless requested otherwise, all PL-C lasers will be sent with altered circular key lock, which allows the removal of that key in both the 'on' and 'off' position.


There is no need to have the pin switch in the tailcap altered. The new flush fit pin can simply be just left in place-

HOWEVER

plz note that the 'on' red button found with the current PL-Cs is very touch sensitive and the laser can be turned on at times you may not desire.(like in a suitcase -bag- backpack - etc.) So I suggest that you ALWAYS either turn the laser off with the circular key, remove the tailcap pin, remove the battery(ies) or a combination of any two. ALWAYS store lasers in a place that youngsters cannot possibly gain access. If you do NOT they WILL be playing with them first chance they get.

You may request the key to be not altered. But plz do not wait until the last minute to inform me of this or any other special instructions--TY--hak



If you are looking at this thread for the very first time plz read all of it.

for more info see the many reviews of JETLASERS.

If you are not in the CONUS or Canada- DO add yourself to this list but also contact Gray at JETLASERS for availability and your cost to ship. Your choice(s) will be sent to you from JETLASERS- not me.




I am now taking names to add to the GB#6 'maybe' list- this atm will not be binding. The title of this thread will change as this GB goes thru the steps. So I suggest you do a subscription to it as you will be notified via email when things progress. To see how I host these GBs see any of the OPs from the first 5 GBs a few things have changed but basically this GB will be ran the same, especially this one which has pretty much all questions answered-so please do your own homework and ask me questions only after you have tried to find the answers yourself. The only request I have is to allow Gray and I to solve any issues you may encounter before posting complaints on the forums. AND when you can, please make a thread with your HONEST review of your new JETLASER item, plus a +rep for Gray would be a kind gesture too.

http://laserpointerforums.com/f55/j...ments-now-its-time-send-your-funds-64196.html


link to GB #5 OP- contains what is available ad GB prices. READ it slowly and throughly and look at all links provided within.

I do only PP for the shipping and handling costs. I do not use PP for the cost of your items unless you make arrangements with me in advance. So have your $$ ready ahead of time for your USPS MO(preferred)-bank or personal check.
If your personal check does not clear(or does not in time to send the $$ to JETLASER) it will be returned to you.


So be ready to send it early in the payment due period.


I would rather send a USPS MO to someone I know and trust than PP a stranger. I am no stranger on this forum. All items are shipped by me with full insurance and signed delivery confirmation for CONUS it will arrive in 2 to 3 biz days. Using this method has never failed me so far. You get to see your laser on my meters before you pay me for the shipping. Should you not like what you see I will refund you laser cost via USPS MO and re-sell it or return it to JETLASER. I ordinarally only ship to your CONFIRMED PP ADDY!!- no outside CONUS- Upon request I will now ship to Canada(but you choose the method of shiping and how you want the box labeled once it leaves my hands the rest is on you.-but SORRY--still no PO boxes-APOs -ETC-- I may ask you to PP 1$ for payment of goods in order to get your confirmed PP address and to be able to print your ship label.

Those outside of CONUS/Canada are fine for signing on for the GB#6, but you will pay JETL and receive your item directly from JETL. See Gray for your shipping costs and pricing. JETL only ships via DHL Express- very fast-very safe but not very cheap. 100% great shipping so far. Be penny wise not pound foolish- DHL Express is the smart choice.
There may be a additional shipping charge for an equal share per laser for the cost of China to Texas ship costs. In the past this has been as high as 14$ and a low 7$ and in a few GBs that shipping that was entirely paid by JETLASERS.


SO...
for now I have no exact date for the final days of this GB. I strongly suggest that you both PM me and post here to get on the list and do a subscription w/ email notification for this thread. There MAY be a limit to the number of items that we will be allowed to order, so don't count on jumping in at the very last minute. All those not in the CONUS/Canada must order the GB items directly from Gray but can be added to this GB lists --sorry its not my choice, but I have no intentions of getting in a jamb due to customs,the USA IRS, VAT, duty, or seizure of your items.

There are a few lasers in my possession from JETL that are new and FS.
Pricing is very close to that in the GB....PM me if you want a good deal on an overspec JETLASER and dont want to wait for this GB to close. My prices are firm so no lowball offers please.

cheers and Peace


hak
 
Last edited:





Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: JETLASERS GB #6 Feeler

:DTHE LIST SO FAR>>>>:D

1) hakzaw1-- Ti-B 532 or 405--next time- upgrading 635- 200 to 400-PL-D.
2) yobresal- My guess is that Luke will want a 532nm JETLASER(since he builds all the others himself-lol) no response.
3) aryntha--Matt has been wanting a JETL 473nm since GB #1- so... sil vous plait
getting 635/200 PL-D -delayed order--
4) CHDHC-- Corbin sez yes but his bank sez NO-- maybe next round.
5) tysonc1979---sitting this on out.
6) InfinitusEquitas-down for a 200mW Ti B 532nm: $270
7) jmgallegro-??==where are you Jose??
8) Trevor--cash short ATM
9) joshshermannn1 -needs to sell not buy (dont we all)
10) Whodunit-13579-405nm 150mW Ti pen, and the 532nm 100mW Ti pen.
USPS MO for four lasers on the way-thanks professor.
11) Ra1nfade....."gonna pull the trigger on the Ti-B 532/150 @ $235."
^^ paying soon--PAID.
12) Paul
13) Bobhaha
14) Boosted- PL-D 532/500mW- $430 (w/ NO eyeware) has a possible credit from a return.:)shipping directly from JETL--
15) Whodunit13579-(friends)-405nm 400mW(AFAIK ITS A 500mW) PL-C, 650nm 300mW PL-C--USPS MO on he way--Thanks Andrew-
16) BlueBumbleBee-(Vancover ROCKS!!)--OUT- maybe GB #7
17) Lase- wants a 473nm (as does aryntha!) GL and thanks
18) Janx-(singapore) will be ordering directly from Gray.
19) Tonga- Ti-B 532nm contact Gray for availabllity and pricing.PAID TY
20) Bobby Shaftoe-Rod has a credit to use for this GB.. wants a Ti-B $220 has creditof IIRC $255. Ordered- Stlll had credit 0f $35.
21) romogracie- pl-c 532/600- getting directly from Jetl--TY

some I have put on this list were those who tried to go with an earlier GB but needed to wait.:cryyy:This was done purely to give them a spot on the list.
As this is NOT a binding list there is no need to worry about being on it ATM.
If you are sure you want out plz just PM me and I will edit.:(

EDIT UPDATE!!:wave:

copypasta from last GB- some prices may have changed. SO be advised!!
The lowest price(next to the mW) is the GB Price +plus shipping.(not included)
_IF WANTED w/o glasses/goggles deduct $10.;)
Shipping is extra.______________________________________________
NEW!!! TI-B SEXY host!!
445/300------$220--see my review in the reviews subforum--now!
405/300------$220
both take 16340 (two) not included. but do come with chargers.
Ti-B 532/150 @ $235.
ATM I have no prices or know whats in stock
532/???mWs at $???- takes two 15400s(iirc)
PM Gray about the other options for Ti-B/532.
______________________________________


PL-C or PL-D
532nm (Green) GB .....Retail (full price)
150mw >150mw 189$ ..219-289$ <---- Hak sez-for 189$ this is a deal. ........
250mw >250mw 269$ ..279-369$ <--- " ".....my fav.
300mw >300mw 315$ ...339-429$ :san:
400mw >400mw 390$ ...459-599$
500mw >500mw 440$... 539-699$ (0ne waspeaking ~799mWs!!!)
600mw >600mw 560$... 669-999$ (see Brazil Regina's review--woot!peak close to 1W!!!) you go girl!!
__________________________________________

PL-C or D(takes two 16340s)
4 05nm (Violet/Br)
500mw >500mw 255$ -- 299-399$

sorry the 800mW is atm not available,
____________________________________


PL-C (Blue) or D(two 16340s)
445nm ............GB....... retail
500mw >500mw 225$ 265-375$
800mw >800mw 235$ 285-395$
1000mw >1000mw 255$ 299-499$:gun: mine was 1100mW:na:
_________________________________________





PL-C (Red/orange) or D
635nm

635nm ,,,,,,GB .......retail
200-mW 310$ ---349-489$ NEW LOWER PRICE @295.00 see the new review

First Review of 635/200mW JETLASER-- PICS!!
400-mW 440$ ---489-689$ --this one makes me happy:)
__________________________________________
PL-C or D
650mW (Red)
GB retail
300mw 230$ 279-399$
400mw 380$ 429-599$
______________ ___________________________

808nm Near IR Power
GB retail
1000mw >1000mw 210$ 259-399$
1500mw >1500mw 245$ 299-499$
2000mw >2000mw 350$ 399-599$
_________________________________________
980nm IR
Gb retail
1000mw >1000mw 210$ 259-399$
1500mw >1500mw 245$ 299-499$
2000mw >2000mw 335$ 399-599$--Lowest price is the GB cost plus shipping
_____________________________-

JETLASERS is the only Company in the World offering Ti lasers with so many choices.
Stock afaik IS Limited so You check with Gray(lpf Pm ) for availability and price.:eek:
**************************************

most of these are still available
PM Gray for more info.
Titanium laser pointer pens
Wavelength(nm) Output(mW) USD
405nm 150mW .....$160 new lower price
405nm 200mW .....$220--new lower price ALL BLURAY
405nm 250mW ----$270-new item

ALL DPSS GREEN Ti-pens-w/ keylock on some models
532nm 100mW ...$165 NEW lower price!
532nm 150mW ...$195-- NEW lower price--ALL DPSS GREEN
532/200 and 532/250 are no longer offered ATM.
........................................
---two wavelenghths RED

635nm 20mW $145-closer to red/orange NEW lower price!!(14440 or two aaa)
---and (comes with extension tube allowing use of two aaa s{at reduced mWs}but not by much)
650nm 200mW $165-darker red color NEW lower price!!

Some (maybe all) Ti pens come with an extension tube allowing for Primary batts ( and a lower output as well)

BEAM< EXPANDER comes with choice of Pl-C/D or Ti pen mounts see my review-here better pics will follow-sorry)

Review: Jetlasers 3x and 5x beam expanders-these are quality optics and allow for lower divergance and burning abilities at greater distance.

3X--$130
5X ..$150
10X...$180-- NEW ITEM!
You must choose adapter for JETL B.E.s. PL-C or Ti. One adapter comes free with each BE.
***********************
All PL-C/D (et al) orders come with safety glasses or goggles, Charger. One pair circular keys- one wired tailcap dongle and one new style JETL cap pin- nice.
The PL-D uses no keys!!!(Confusis say:' man who lose key to girlfriends house gets no-new-key'.--PM me if you do not get the joke!):shhh:
For extra eyeware...
JETLASERS eyeware comes free with a laser order(you get the glasses style w/ the orange lenses unless you ask for a different type (ie the goggles style are better if you need to wear them over your eyeglasses or if you want any pair other than the orange lens--the blue lens are cool) --fairly good protection at a low price-very nice case- the orange are good for most all nms--starting at 23$w/ laser purchase or previous laser gotten. All others add shipping.
all above prices are for the GB ONLY--subject to change.
JETL lasers are NOT shipped w/ batteries due to new regs.
I still sell 18650s and chargers PM for details.



cheers hak
 
Last edited:
Joined
Jan 27, 2011
Messages
701
Points
0
Re: JETLASERS GB #6 Feeler

You can put me on the list Hak, I'm in for sure just need some time to think about what I want to get...
 
Joined
Jul 20, 2011
Messages
100
Points
0
Re: JETLASERS GB #6 Feeler

I'm in, but like you said ill have to get Gray to post directly to me because of me being in the UK, I just need to find a damn paypal i can use as paypal won't accept my card.

For anyone wanting in... Hak is a decent honest forum member and your in very safe hands should you decide you want in :)
 
Joined
May 31, 2009
Messages
3,239
Points
63
Re: JETLASERS GB #6 Feeler

PL-C or D(takes two 16340s)
405nm (Violet/Br)
500mw >500mw 255$ -- 299-399$

sorry the 800mW is atm not available,

Do you know if the 800mW version is available yet?
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: JETLASERS GB #6 Feeler

Do you know if the 800mW version is available yet?
I am not totally sure why but it is possible that some of the 12X diodes purchased by JETLASERS were in fact 10X. This is a possible explaination why they were unable to get consistant overspec mWs from the Pl-C 405/800.
It cost Jetl a lot to refund-or replace the 800s considering the shipping, this having to be done several times. Like I say I am not sure what happened by those making these descisions at JETL may just not want to offer more than the pl 405/500s and 405/300 Ti-Bs. I suggest you email or PM Gray directly for more info.

side note-
in another thread I suggested placing a sticky dot over the opening on PL-Ds and Ti-Bs (to keep out dust)but need to add that failure to remove this BEFORE turning the laser on could reesult in smoking the sticker and maybe even getting something on the front lens. SO ... take extra care in regards to this practice.

In Regards to JETL GBers not residing in CONUS- I need to still add you to the GB lists even tho your payment and shipping will be directly via Gray.

This is needed so Gray can know how many are wanting GB prices as his bosses can, and may, limit the number of units allowable per GB at any time. I am still here to answer questions and provide support but all other matters such as returns or repairs will be thru Gray at JETL.

ATM use the price list in the OP of JETL GB#5. All three nm (445/405/532) are now available in the Ti-Bs and this is one laser you will never want to sell. Ask any of those who were shown a demo of it in person at SELEM (PontiacG5- Rocket-daguin,aryntha, Dr Evil, and qumefox et al) all the LPF members attending SELEM were also offered a demo of the superswitch and using the code. IMO IIRC they were about 50/50 in regards to finding it easy to use. It does take practice.
Its purpose is to keep others from turning the laser on so by default it is designed to be NOT super easy. It called the SuperSwitch...NOT the SuperEasySwitch--lol

BTW it is not possible afaik to get the PL-D host with the PL-C switch.
But you MAY be able to get a PL-D with the switch code bypassed (IDK for sure) and also Gray tells me that he is working with his techs to change the switch to be able to us a more simple code.

@paul--thanks for the kind words.

I will put both you and Bob on the May-Be-Interested list.


I would like to see GB#6 take less time than the previouse GBs.
So kindly please begin to narrow your choices and be prepared for the next phase of GB #6 for all JETLASER Items- including very nice stands- Diff grates- BEs-glasses, goggles and more.

I think the two best sellers this time will be the Ti-Bs and the PL-C 532/250.
Consistantly overspec and reliability is even better with these than the other fine lasers.

Most questions are answered in the OPs of past JETL GBs.
plz look there before you PM me-T Y.

hak
 
Last edited:

Jaxz

0
Joined
Oct 20, 2010
Messages
244
Points
18
Re: JETLASERS GB #6 Feeler

Depending on how much JL is charging for my repairs on my Ti-pen 200/532, I may consider a Ti-pen 20/635. Does that count as being included in the GB#6?
 
Joined
Aug 16, 2010
Messages
261
Points
18
Re: JETLASERS GB #6 Feeler

Was in on the #2 GB, hak is an awesome guy to deal with and everything went super smooth.

Thinking of jumping on this one... Gonna send a PM with what I'm thinking...
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: JETLASERS GB #6 Feeler

Im thinking you will like the 500-532- mine was very nice -OSpec >100mW
only $430 ( w/o eyeware) with charger and yr. warranty.
You can apply your refund and any cost for shipping not already refunded.

The superswitch is not so hard- takes some practice but..

BTW I no longer recommend a sticker over the apeture of the PL-Ds(they have no shutter) as, if left on, and the code is entered the laser comes on instantly and is not as quick to shut down as the PL_Cs are. so make a cap from something else to keep out the dust. You sure dont want to smoke a sticky dot onto the front lens.
 
Joined
Aug 16, 2010
Messages
261
Points
18
Re: JETLASERS GB #6 Feeler

Im thinking you will like the 500-532- mine was very nice -OSpec >100mW
only $430 ( w/o eyeware) with charger and yr. warranty.
You can apply your refund and any cost for shipping not already refunded.

The superswitch is not so hard- takes some practice but..

BTW I no longer recommend a sticker over the apeture of the PL-Ds(they have no shutter) as, if left on, and the code is entered the laser comes on instantly and is not as quick to shut down as the PL_Cs are. so make a cap from something else to keep out the dust. You sure dont want to smoke a sticky dot onto the front lens.

I'm not a huge fan of the "superswitch" (I had a WL Arctic) but its not a dealbreaker.

Also, I'm not getting a refund. They are fixing my PL-C 250 and shipping it back to me. Then I'll decide on selling it (and my firedragon) to help pay for this one. I didn't know a refund was possible?
 
Joined
Jan 27, 2011
Messages
701
Points
0
Re: JETLASERS GB #6 Feeler

Hak, do you know if the Ti-B will be offered in 532?
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: JETLASERS GB #6 Feeler

I'm not a huge fan of the "superswitch" (I had a WL Arctic) but its not a dealbreaker.

************************you have your choice of PL-C or PL-D same price.


Also, I'm not getting a refund. They are fixing my PL-C 250 and shipping it back to me. Then I'll decide on selling it (and my firedragon) to help pay for this one. I didn't know a refund was possible?

*********OK I misunderstood. your call. About the refund -I cant say--just ask GRAY if that is an option or not at this time. *********


Hak, do you know if the Ti-B will be offered in 532?

**************One is being delivered asap to GDB in Canada(he missed the guy on Friday)
he opted for a partial refund as it is not quite 250mW- So Gray knowing this before shipping lowered the price and it is now a TI-B 532/200. Other sellers
would just ship and hope you never knew...

PM Gray about moar details on 532 Ti-Bs.
 
Last edited:
Joined
Jan 27, 2011
Messages
701
Points
0
Re: JETLASERS GB #6 Feeler

Ok Cool thanks hak :) I just wanted to know if I could get a Ti-B n a 532. GBD Had had told me about his and I'm waiting for his review :D
 
Joined
Mar 16, 2011
Messages
813
Points
0
Re: JETLASERS GB #6 Feeler

sorry, but im new to the jetlasers group buy
how many people do you usually need for this to go through?
and how long does it generally take from the "ok send money" to "laser at my door step"
thanks
im mostly interested in the PL-D 532nm 300mw 315$ for future jetlaser GB
(it looks like arctic)

EDIT: and for that price, is the googles, batts, charger included?
or is there an "add on" feature?
or do we have to get them separately?
thanks again
 
Last edited:

Jaxz

0
Joined
Oct 20, 2010
Messages
244
Points
18
Re: JETLASERS GB #6 Feeler

Lens, I have email'ed Gray to be in this GB for the 20mw/635nm Ti-pen. You may want to add me to the list
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: JETLASERS GB #6 Feeler

sorry, but im new to the jetlasers group buy
how many people do you usually need for this to go through?

********* it varies-- for the JETL GBs, Gray and I just keep an eye on the list as it grows and when it feels right we move into the next phase.
Gray needs to keep his bosses at JETL happy- the whole idea from their standpoint is to get the lasers out so more will know about them and the customer service provided. This one may be the last- then the prices go back to retail, atm I do not know if there will be a JETL GB #7.*****


and how long does it generally take from the "ok send money" to "laser at my door step"
*************8
Once all the MO & bank checks have come in or the personal checks have cleared our money is bank transferred to Gray- IF all the lasers wanted are in stock he boxes them up and sends via DHL Express pdq- that takes up to five days to get to me, but one time I had them in hand in less than 72 hrs!

I inspect and test them, sending all a metering pic to thier Email addies and unless someone at the time declines I send them out- insured w/ signed delivery conf. with 2/3 day delivery. Never had anyone opt for the refund.
Refunds are sent in the form of a USPS MO- which, if you mess with one ,is AFAIK a federal offence IIRC.

I dont ask for the shipping cost until they are in my hands. I ask for that to be sent PP as a 'personal payment owed for service', which it is(no fee). I do not want to take payments for the lasers themselves via PP as I may someday down the road have to PROVE that these transactions were not part of a profit making biz. Anyone not comfortable with this is free to not get in on my GBs. Personally I would rather send a USPS MO to a friend or some one with good rep than a PP payment to a stranger. PP being a part of EekBay is more inclined to helpful to a buyer if it was for a Feebay deal for all others- not so much. Sellers using PP get scammed by some buyers so it is a two way street.
BTW I do not ship outside of CONUS or send to any address other than your PP confirmed one w/o prior approval. No APOs, PO Boxes etc.
***********************

thanks
im mostly interested in the PL-D 532nm 300mw 315$ for future jetlaser GB
(it looks like arctic)

EDIT: and for that price, is the googles, batts, charger included?
or is there an "add on" feature?
or do we have to get them separately?
thanks again

************
I would NEVER recommend shipping for, out of USA, any over 5mW laser with the batteries in the same box- why make it any easier for someone to power it up and deem it unsafe?? We have even taken the extra cost to send no complete lasers in any one box(ie tailcaps in another box)

All JETLASER afaik come with glasses or goggles and a charger. Gray offers a 10$ discount if you decline the eye ware--- anyone getting Lasers needing 18650 batts can buy them from me and I will include them when I re-ship. They are also available from several other LPF members like Larry. There also may someday be a ban on Li batts being shipped.

Many answers to questions on my JETLASER GBs can be found in the OPs and other posts in my other JETL GBs.
Happy to help if you still have questions.


len
 
Last edited:




Top