- Joined
- Dec 9, 2011
- Messages
- 221
- Points
- 28
Hey everyone. Havn't posted in some time. I was going through my shop and have some prototype laser combiners that may be of interest. These are low divergence lasers that use the P73 fac corrected diodes. The diodes are special made by lasertree and not the ones they have on ebay.
The first is a 3 red combiner that has two extra ports for a green and a blue fac corrected diode. The Blue and Green are not installed and also would need appropriate dicros to make a full RGB. I will include the extra circuit board diode mountd and hardware if you want to experiment making it RGB. The output lens is a high quality coated achromat. divergence is about .35mRad.
RGB
The next is a 1" round 2 diode red combiner with a PBS cube to combine the beams. This has ridiculously low divergence for a MM red, about .2 mRad!
PBS SOLD
The third is a knife edge 3 diode red combiner. It has about .35 mRad divergence. The body diameter is 1". I have 3 of these available. This module has a lid that covers the mirrors.
3X
All modules are anodized black and have 24 pitch focus threads. These are just the optics and diodes. user will have to provide drivers batter holder etc.
photos
Please post any questions here. Also, more photos to come.
The first is a 3 red combiner that has two extra ports for a green and a blue fac corrected diode. The Blue and Green are not installed and also would need appropriate dicros to make a full RGB. I will include the extra circuit board diode mountd and hardware if you want to experiment making it RGB. The output lens is a high quality coated achromat. divergence is about .35mRad.
RGB
The next is a 1" round 2 diode red combiner with a PBS cube to combine the beams. This has ridiculously low divergence for a MM red, about .2 mRad!
PBS SOLD
The third is a knife edge 3 diode red combiner. It has about .35 mRad divergence. The body diameter is 1". I have 3 of these available. This module has a lid that covers the mirrors.
3X
All modules are anodized black and have 24 pitch focus threads. These are just the optics and diodes. user will have to provide drivers batter holder etc.
photos
Please post any questions here. Also, more photos to come.
Last edited: