- Joined
- May 4, 2009
- Messages
- 5,443
- Points
- 113
OK here is a new part for them hard to ground laser builds.
I like to use the 3rd pin or grounding pin that is on the laser diodes but not all laser diodes have the ground pin and it's not always easy to pick up
the ground for the driver so I came up with this idea and thought it might help others.
It's a Aixiz back half cut down and the chrome is removed and a silicon insulated lead is soldered on so now it's easy to get the ground for the driver.
If you need one check here, they will be available soon> http://laserpointerforums.com/f64/flaminpyros-stuf-67118-5.html#post966672
I like to use the 3rd pin or grounding pin that is on the laser diodes but not all laser diodes have the ground pin and it's not always easy to pick up
the ground for the driver so I came up with this idea and thought it might help others.
It's a Aixiz back half cut down and the chrome is removed and a silicon insulated lead is soldered on so now it's easy to get the ground for the driver.
If you need one check here, they will be available soon> http://laserpointerforums.com/f64/flaminpyros-stuf-67118-5.html#post966672