LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Need a diode lens guy. :)
- Thread starter Rewkie
- Start date
You can't see much but that's it I guess. I shoved a quetip in the diode lens trying to get a spec of dust off of it and it messed everything up. I also don't have a lpm and I plan on selling it after it's fixed so if someone could measure it for me that would be great.
Last edited:
jimdt7
0
- Joined
- Feb 5, 2011
- Messages
- 1,893
- Points
- 48
For standard aixiz module...? :thinking:
Colour and Power of your laser? :beer:
Jim
Colour and Power of your laser? :beer:
Jim
Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
Clean it again. A Q-tip doped in alcohol should do the trick if the dirt isn't burned into the window. Read also this thread for more solutions.
http://laserpointerforums.com/f65/weird-445-output-78421.html
http://laserpointerforums.com/f65/weird-445-output-78421.html
It's burned in, I tried alcohol a while back and haven't had time to send it off to get repaired. It's a copper module from dtr in a SL s4 host and I don't know the power. But I can see the beam in broad daylight (2 pm) so I'm guessing it's like 1.4-1.6w.
- Joined
- Jun 26, 2012
- Messages
- 788
- Points
- 28
Your probably best of just buying a whole new lens.
Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
The dirt is on the diode window and not the lens. Changing the lens won't solve the problem.
- Joined
- Jun 26, 2012
- Messages
- 788
- Points
- 28
Ahhh lol, Didn't read the thread properly :/
- Joined
- Apr 5, 2012
- Messages
- 726
- Points
- 0
Yep, not much you can do but buy a new diode. Sorry Rewkie :/ Thats never any fun when little things happen like that. Best of luck my good sir.
- Joined
- Jan 13, 2010
- Messages
- 2,516
- Points
- 63
^ You don't need to buy a new diode. There is crap on the diode window. All you need to do is remove the diode window or can and the problem goes away. The problem is you can get dirt on the die VERY easily and that could make the problem go from "Aah, there's just some dirt on my window" to " Crap, my diode is dead"
I don't get what is so hard to understand. The OP is requesting a decanning service .
I don't get what is so hard to understand. The OP is requesting a decanning service .
Last edited:
- Joined
- Jun 25, 2011
- Messages
- 1,481
- Points
- 63
it took me several wipes to clean some crap off of my 12x diode using acetone. you may want to keep trying.
- Joined
- Dec 29, 2009
- Messages
- 3,136
- Points
- 63
+1. Keep trying to clean it. Worst case, you scratch the lens and have to have it decanned. Which is where you are at right now, right?
Always use a new swab, don't want to scratch the window with whatever the swab picked up on its first wipe.
isopropyl has always worked fine for me. You can find 99% at some pharmacies, 91% at most grocery stores, %70 not worth bothering with.
Always use a new swab, don't want to scratch the window with whatever the swab picked up on its first wipe.
isopropyl has always worked fine for me. You can find 99% at some pharmacies, 91% at most grocery stores, %70 not worth bothering with.
