- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
Xizor said:
with lasers I have always it is better to start off with this statement or question...
what is your budget?
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
How to Register on LPF | LPF Donations
wood etching laser table questions
- Thread starter Xizor
- Start date
with lasers I have always it is better to start off with this statement or question...
what is your budget?
- Joined
- Jan 2, 2009
- Messages
- 11,800
- Points
- 0
Pat can you post the design sheet of the miniature bench you made?
I mounted a 6x Blu-Ray on my cnc and used Photo V Carve from Vectric. The photo size was 2 x 3 and it turned out ok but it took almost 2 hours to do it, I had to slow the machine down to a crawl. The software kinda works like you described but only in a straight line. The up and down travel was only a few thousands. After it was done I lightly sand the top to give it light and dark separation. I could do the same photo with better results with a V-Cutter in a few mins so I scrapped the project. I might try it again some day with a different setup. Good luck, it sounds like a interesting project. If you are able to etch with the cnc please let me know your setup.
Chuck
Chuck
Sorry to steal your thread Xizor, I just have a quick (related) question for laserman.
I'm contemplating building a laser cutting table, but all i want to cut is thin balsa (about 1/8th of an inch). Would i need a CO2 laser, or could i get away with something cheaper.
Thanks for the help
-Knight
I'm contemplating building a laser cutting table, but all i want to cut is thin balsa (about 1/8th of an inch). Would i need a CO2 laser, or could i get away with something cheaper.
Thanks for the help
-Knight
Warske
0
- Joined
- Mar 10, 2009
- Messages
- 145
- Points
- 0
Any chance you could post a picture of the result, and/or your setup before you scrapped it? I would love to see it!CRFultz said:
Warske
0
- Joined
- Mar 10, 2009
- Messages
- 145
- Points
- 0
@Laserman532,
It wasn't until Blu-Ray_Junkie said "miniature bench" that I realized how small that furniture is that you made! I'm running 1024 wide on my monitor, so the dime was off to the right and I missed it the first time through. I went back and scrolled over to see it. ;D
From the picture, it looks like the wood you used is about 0.115" thick, or just under 1/8"
So is that made of walnut and cut with a 50 W CO2?
What size is the beam, did you change its size or shape (compared to the unmodified laser output) and what cutting rate did you use?
That is beautiful work!
I always wanted a CO2 ever since I saw the articles in Scientific American (many years ago) on how to make one. I think those were only a few watts, though.
It wasn't until Blu-Ray_Junkie said "miniature bench" that I realized how small that furniture is that you made! I'm running 1024 wide on my monitor, so the dime was off to the right and I missed it the first time through. I went back and scrolled over to see it. ;D
From the picture, it looks like the wood you used is about 0.115" thick, or just under 1/8"
Laserman532 said:
So is that made of walnut and cut with a 50 W CO2?
What size is the beam, did you change its size or shape (compared to the unmodified laser output) and what cutting rate did you use?
That is beautiful work!
I always wanted a CO2 ever since I saw the articles in Scientific American (many years ago) on how to make one. I think those were only a few watts, though.
- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
knight said:
CO2 lasers are the cheapest watt per dollar laser you can buy. 1/8 balsa can be cut with about 25 watts of co2, (10 watts slowly with charring). (I use 60 watts with a fast cutting speed and air assist to keep the wood from catching on fire. If you cut slower you char the edges (and could start fire). 10.6 micron wavelengths are ideal for engraving and cutting organics and plastics. The key is to use as much power with the correct cutting speeds (fast) to least affect the HAZ (heat affected zone) The thin plywood in the RC field dosnt cut well due to the glue between the layers.
If you look closely at the cube in my last photo you see there is no charring...you try to vaporize the wood so there is no time to build up heat. Slower speeds create worse HAZ. The wood used in those items is alder less than .125" it varies around .115" (excellent measuring technique warske)
I engraved a portrait of Michael Jackson (with breast) on a graham cracker (sold it on ebay), a beautiful picture of my daughter on a flour tortilla, my name on a peanut, the MTV logo on an emu egg, and did a box of ritz crackers with the texas instruments logo for a board meeting. They are real fun to play with, but can start a fire very quickly if something glitches.
- Joined
- Jan 2, 2009
- Messages
- 11,800
- Points
- 0
Guess that's a big "no" ;D
No problem Pat. Take care, and good luck with your projects.
No problem Pat. Take care, and good luck with your projects.
- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
Blu-Ray_Junkie said:
there are no prints. it is a vector .cdr file. if you have corel draw it would open, it is not that i dont want to give it away, but do I want to take the time to go through the dance without sincere interest.
- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
- Joined
- Jan 2, 2009
- Messages
- 11,800
- Points
- 0
No more dancing..life is short. I have always been sincere, and will always be here if you needed something. You really got me all wrong. I know you probably don't believe that, but its true.
I actually want to make a full size version in oak for my girlfriend to put in her garden. Vaporizing wood is crazy. I'd love to see that. What is the maximum thickness of wood that you can cut?
I guess ;D ;D ;D thats F'n funny..I just choked on my lunch ;D
I actually want to make a full size version in oak for my girlfriend to put in her garden. Vaporizing wood is crazy. I'd love to see that. What is the maximum thickness of wood that you can cut?
Laserman532 said:
I guess ;D ;D ;D thats F'n funny..I just choked on my lunch ;D
- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
Blu-Ray_Junkie said:
I guess ;D ;D ;D thats F'n funny..I just choked on my lunch ;D[/quote]
I dont know how you would scale it to a full size, if you did the points between the nodes would make it a steping instead of smooth curves. Maximum thickness of wood single pass is about .1875 to .25 or so. Making a multiple pass tends to char wood. If you have a cad program I can e-mail file you need to accept .eps, or .ai, or .cdr. Im not trippin...i doubled my medication, and when Im not sleeping, i can travel through time...so it works out...
- Joined
- Jan 2, 2009
- Messages
- 11,800
- Points
- 0
Laserman532 said:
I guess ;D ;D ;D thats F'n funny..I just choked on my lunch ;D[/quote]
I dont know how you would scale it to a full size, if you did the points between the nodes would make it a steping instead of smooth curves. Maximum thickness of wood single pass is about .1875 to .25 or so. Making a multiple pass tends to char wood. If you have a cad program I can e-mail file you need to accept .eps, or .ai, or .cdr. Im not trippin...i doubled my medication, and when Im not sleeping, i can travel through time...so it works out...
[/quote]You are probably right. Maybe I can fudge the design. She will never know either way. Send some of those time warp drugs over ;D my Xanax lost its edge long ago.
Peace LaserMan
- Joined
- Sep 12, 2007
- Messages
- 9,399
- Points
- 113
You're a strange duck. What did the cracker sell for?
- Joined
- Dec 27, 2008
- Messages
- 413
- Points
- 0
I think it only got about $15.00 a bit less probably, but as they say...you can almost sell anything on ebay.Cyparagon said: