Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

What is the current most strongest Infrared laser diode?

R

rajhlinux

Member
Joined
Dec 26, 2020
Messages
79
Points
8
Hello,

What is the most powerful infrared (≥ 800nm) laser diode and also which manufacturer makes them?

I'm checking at "civil lasers" website and currently the most powerful Infrared diodes they have are only 1 Watt:

850nm 1000mw/1W Infrared/IR laser diode T018(5.6mm)

850nm 1000mw/1W Infrared/IR laser diode T018(5.6mm) - 850nm 1000mw/1W Infrared/IR laser diode T018(5.6mm) [Specifications] Name: Laser Diode Output Wavelength: 850nm Output power: 1000mW
www.civillaser.com

I would like to use them as laser pointers.

Thanks for any recommendations.
 
Last edited:





I assume you mean to use an IR pointer with your night vision equipment ?
If so you don't need the strongest possible, what you want is a beam with good divergence.

Look at this offering, ignore the 1mw rating, it draws 280ma @ 3.7v so output is likely 100-200mw +/-

Remember to lase safely, never point any laser at people or pets, windows or any vehicles.
 
RedCowboy said:
I assume you mean to use an IR pointer with your night vision equipment ?
If so you don't need the strongest possible, what you want is a beam with good divergence.

Look at this offering, ignore the 1mw rating, it draws 280ma @ 3.7v so output is likely 100-200mw +/-

Remember to lase safely, never point any laser at people or pets, windows or any vehicles.
Click to expand...

Thanks for the reply and info.

Its for a custom project and it needs to be at least 1-3 watts of optical power.
Used in a special CNC project and not related for night vision.

I see that ODIN lasers are selling one for $700 for an 808nm 3 Watt and not sure if it is legitimate and what type of IR laser diodes they are using:

biglasers.com

"ODIN" Infrared (IR) Laser 808nm - 980nm - 1064nm

The ODIN high power IR handheld laser is available in three frequencies 808nm, 9890nm, and 1064nm and is available from 500mW to 3,000mW.
biglasers.com biglasers.com
 
thers more affordable diodes here, I havent bought any idk if theyre reputable teclulu.com; use paypal

1W 808nm, 830nm 210mw, 940nm 700mw; all under 15$
Maybe ebay sifting will turn something nice up

What is the project
 
Last edited:
You always have coherent FAPs but divergence makes the less useful for CNC work
 
RedCowboy said:
Proper safety goggles are a must.


Click to expand...
Did you both say proper and linked AliExpress in the same post?


What you (probably) care about in CNC is highest possible brightness and this is very limited with laser diodes. If you're too budget constrainted to go for DPSS laser then I'd suggest buying highest power 50um emiter LD you can afford (0.5 or 1W) and combining two of them with PBS. If you need even more power than knife edge multiple of them being the slow axis. Whatever you do remember to shape them beam with cylindrical lens
 
You might repurpose a co2 tube. You didn’t say what wavelength IR you want just what you can find. There are plenty 5 w or better 1064. If you want power and it can be pulsed there are qswitched units from two trees. Lots of possibilities.
Heck open a cheap pointer and remove the doubling crystal.
 
You must log in or register to reply here.





Back
Top