Warsun PL515 30mw Diode

[badboybilly]

Here's another of these tiny mini stainless pocket lasers, this time a single mode Diode the PL515 30mw, The suggested max current was 180ma so I set this Xboost to 220ma. It's gonna be nice to have a blue,green,red and purple all in single mode with these mini hosts.

These 3.8mm diodes have to be pressed in vary carefully as they like to slide in the modules on an angle. This is a awsome diode apparently some as low as 510, I can see a little difference in color side by side with my PLP520B1 witch is a lot more powerfull but still noticeable to me.

On to the best part the pics, And thanks again to DTR for his help and great products.

 

[badboybilly]

Ok so there appears to be something on the diode window, I tried to clean it with Some plumbing tape on an ear bud but wasn't having much luck.

 

[badboybilly]

Ok I think this Diode deserves a few more beam pics and an LPM reading.

 

[SyKo]

Please dont post things like these, it makes me want to buy whole trays and spend all my money

Nice clean wunderbar build though.

 

[Isaac Clarke]

Nice!!! now we have a Host Vendor and a Module vendor in Australia.May be i should open an Australian Laser shop and sell complete laser lolz.

 

[SyKo]

Nice!!! now we have a Host Vendor and a Module vendor in Australia.May be i should open an Australian Laser shop and sell complete laser lolz.

Who's the host vendor?
and i fear selling complete laser pointers mightnt be too sustainable for you (someone wearing a high vis vest with a blue shirt underneath might knock on your door )

 

[Isaac Clarke]

i knock on my door before.... for shining a 12 watts red led at their heli

 

[SyKo]

i knock on my door before.... for shining a 12 watts red led at their heli

Probably shoulda had a bit of a longer thunk about that one