Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Vintage Goggles Still Working

Eidetical

Active member
Joined
May 14, 2022
Messages
191
Points
43
These are the goggles I've collected and/or used over the years, and most are still good. Holographers rarely wear goggles because they generally work with lower-powered and/or expanded beams from bolted-down lasers with light control baffles all over the place, but I have to keep them available to satisfy the state. When needing to look at a bright spot, I find it more convenient to grab a pair of polarizers (an educational set in 4" diameter ring mounts) that I can look through and adjust to the density I want.

Goggle Group.jpg
 





lasingfox

Member
Joined
May 2, 2020
Messages
84
Points
18
the spectrogard ones are lovely! i briefly had two pairs but it seems they are very rare.. i've only ever seen 4 in existence including the one in your archive... they are great for ion lasers :) did yours have some sort of crud on the back side of the filter? both the ones I got had the same sort of crust that was very difficult to remove..
 

Eidetical

Active member
Joined
May 14, 2022
Messages
191
Points
43
the spectrogard ones are lovely! i briefly had two pairs but it seems they are very rare.. i've only ever seen 4 in existence including the one in your archive... they are great for ion lasers :) did yours have some sort of crud on the back side of the filter? both the ones I got had the same sort of crust that was very difficult to remove..
Yeah, I also have two pairs of those and both have similar issues.
 




Top