- Joined
- Oct 18, 2014
- Messages
- 546
- Points
- 63
i haven't seen any 7w NUBM07
it run with driver boost , source by 1 x 18650
here is video :
it run with driver boost , source by 1 x 18650
here is video :
Last edited:
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Unbelievable!! 7W 470nm NUBM07
- Thread starter thanhtung
- Start date
- Joined
- Jul 10, 2015
- Messages
- 9,882
- Points
- 113
Have you seen any 445-455nm diodes doing more than 8W ?
- Joined
- Oct 18, 2014
- Messages
- 546
- Points
- 63
yes
- Joined
- Jul 10, 2015
- Messages
- 9,882
- Points
- 113
Which ones ?
NUBM08 ?
NUBM0E ?
NUBM0A ?
What's the highest reading you have seen from a single diode ?
NUBM08 ?
NUBM0E ?
NUBM0A ?
What's the highest reading you have seen from a single diode ?
- Joined
- Jul 2, 2011
- Messages
- 1,011
- Points
- 63
That heatsink needs more copper! Beautiful beam
- Joined
- Dec 15, 2014
- Messages
- 6,782
- Points
- 113
Hi,
That's a C8 host that hold 1X18650 or 2X18350 batteries. I have built many its a great host for plug n play applications. I use a battery tube exstention to hold 2X18650;s when you can find them ,
Why is the 12mm copper module sticking out of the heat sink thats not good cooling for the wasted heat from 7W's .. and the focus adapter is a finger burner it needs some meat .
You would just need to find the correct thread size they all differ from one another .
@ Brendon,
Yes a full copper sink would be in order.. check out the build now that a heat sink for longer run time.
Rich
That's a C8 host that hold 1X18650 or 2X18350 batteries. I have built many its a great host for plug n play applications. I use a battery tube exstention to hold 2X18650;s when you can find them ,
Why is the 12mm copper module sticking out of the heat sink thats not good cooling for the wasted heat from 7W's .. and the focus adapter is a finger burner it needs some meat .
You would just need to find the correct thread size they all differ from one another .
@ Brendon,
Yes a full copper sink would be in order.. check out the build now that a heat sink for longer run time.
Rich
Last edited:
wolfram
0
- Joined
- Sep 13, 2008
- Messages
- 489
- Points
- 43
copper and tec
- Joined
- Oct 18, 2014
- Messages
- 546
- Points
- 63
NUBM0A is good
- Joined
- Jul 10, 2015
- Messages
- 9,882
- Points
- 113
Yes I also get the highest reading from NUBM0A and NUBM44 which is what I told the Chinese seller who makes the recapped NUBM0E, I asked why not recap NUBM0A, but they said the NUBM0E had a higher spec ........but I tested the NUBM0A to higher overdriven output.
I really hope all the newest dlp diodes are not in the multi diode arrays only.
I really hope all the newest dlp diodes are not in the multi diode arrays only.
