Hiemal
0
- Joined
- Dec 27, 2011
- Messages
- 1,443
- Points
- 63
Hey guys; so today, I got my ben boost driver parts; and after like 3-4 hours of straining to get the tiny parts on...(and killing a 450 nm single mode...much swearing and anger as a result)
Set at 442 mA, (1R0 and R75 set resistors) it runs the 12x burner wonderously!
Truth be told; the heatsink was not made for the host actually.
TJ had given me an old 18650 host he had lying around...and for the life of me I could not get it to work properly. I think the anodization was the issue.
But, anyway, I took the heatsink from that host...sanded and polished it and then sort of...well, hammered it lightly into its new host!
Here's the result;
Some beamshotz
Set at 442 mA, (1R0 and R75 set resistors) it runs the 12x burner wonderously!
Truth be told; the heatsink was not made for the host actually.
TJ had given me an old 18650 host he had lying around...and for the life of me I could not get it to work properly. I think the anodization was the issue.
But, anyway, I took the heatsink from that host...sanded and polished it and then sort of...well, hammered it lightly into its new host!
Here's the result;
Some beamshotz
