Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

The 'CONEHEAD' - an LPC-826 Build

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
THE 'CONEHEAD'


Hey guys, here is a little stainless steel build that I've just finished up. I've had this sweet little S.S. host for over a year; it's a very nice quality host that I purchased from Kaidomain well over a year ago, for less than $10.
I think they still sell them for around $13 or $14 now, which is still a good price for a nice S.S. host.

I decided to build this with an 'old school' LPC-826 660nm diode, because after all this time here, I've never owned this wavelength, or built a laser with this great diode.
I'm glad that I finally did though, this diode provides a beautiful wavelength and a nice beam to go with it!

If I remember correctly, this particular LPC-826 diode was given to me by Pman long ago. I matched it up with a micro flex V5 driver from DTR.
I set the current towards the upper end of what I'd seen from past successful builds; I didn't need the max., but close, so when the last tweak of the pot. read 488mA, I called it good enough.

All in all, it turned out to be a pretty nice budget build, since I've only got about $37 total invested in it! :yh:

Here's a list of it's vital statistics.

Components Used For This Build:

  • 'Kaidomain' KSH-S13524 S.S. flashlight host.
  • LPC-826 660nm diode.
  • Micro Flex Drive Driver, set to 488mA (DTR).
  • Custom Aluminum Heatsink.
  • Custom Polished brass Focus Adapter.
  • 1 x 18650 Flat Top Battery (space is tight, flat top works best).

Dimensions & Weight:

  • Length = 148mm
  • Diameter = 24mm
  • Weight W/Battery = 203g (7.16oz)

Measured Power Output:

  • G-2 Lens = 383mW (max.).
  • 3 Element Lens = 300mW.
  • Acrylic Lens = 330mW.


Time for a few pictures!


The begining: S.S. flashlight host kit.
Z7wEvBC.jpg


Exploded view, with original green (changed to black) switch cover.
8tsID1E.jpg


Brass pill, battery board, and retaining ring.
I had lost the original ring, and had to make this one; it's a tiny little thing, but it didn't come out to bad.
6QN3IO4.jpg

hm8kgUl.jpg


Close up view of Micro Flex Drive before soldering resistors for higher output range.
cb0ZWfp.jpg


Driver mounted to diode in 12mm copper module.
Added small copper H.S. disc to driver, along with a $hitty looking solder job on those three resistors; those suckers are TINY!
Note: I've since re-solder those resistors to look better, although they worked fine with the crummy solder job.
A6yqHSl.jpg


Tapered S.S. "nose" piece, which is also tapered on the inside.
Homemade aluminum heatsink with a matching 3.5° taper to fit the inside of the nose piece with full contact.
Custom brass focus adjuster with matching taper.
NwBYg7y.jpg


Assembling the 12mm copper module & H.S. into host with the pill used as the retainer, I also drilled an extra hole in the center of the pill to enable assembly without twisting the wires.
Foe3GcY.jpg


First life! The moment of truth ...does it still work? Oh yeah!
BnyPkeP.jpg


rADDMQi.jpg


iF60lML.jpg


tuEIWAc.jpg


pelkpZ6.jpg


Outdoor beam shot looking toward laser. Laser is shining along a walkway along side of some solar pathway lights that are creating a neat pattern of light on the ground.
w1PsLnf.jpg


Another beam shot, only this time, looking from laser out along the beam.
m5lO8BF.jpg


That's about it for now folks, if you've made it this far, thanks for bearing with me! ;)

Also a big :thanks: to DTR for the driver, and to Pman for the LPC-826 diode! :yh:
 
Last edited:





GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
Oh WOW, its a beauty:beer:
Nice fabricated heat sink to fit the "tapered" nose cone. "Which i'm still trying to picture in my head"??
Bow, you just have this knack of mixing and matching metals that make builds so striking and building them so clean on the insides for function. "Its hard for me to put it in words"
That does not look like a $37 laser build, thats for sure. I also see it running non stop till the battery's die, even with the SS host. I doubt you felt any warmth??
That cannot be your first 660mw:undecided::crackup:?
I got you jealous didn't I when I mentioned Pman sent me a LPC-836 didn't I:shhh::)
 
Last edited:

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Thanks Richie, Red, and GSS, I realky appreciate your comments!

@ GSS, I agree, it doesn't look like a $37 laser, and it would've been a little more if I had to buy the diode, but 826's are pretty cheap anyway. I definitely couldn't let it go for that much!
You are correct in that it can run for a while and not even feel too warm.
I do believe it is my first 660nm, since I believe the Laserbtb 1000 that I have is a 650nm, although I've seen it called both.
 
Last edited:

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
Good job BowtieGuy. Lovely shape, and good beam.
+44 from me. :beer:
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
I totally spaced out the "ConeHead" name:beer:
It does look like Dan Aykroyd :crackup:
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Can't get it out of your head now, can you? :eg:
I was real tempted to add a pic of a "conehead" along with the regular pics, but didn't get around to it.
 
Last edited:

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
I can't:crackup:
you just have to re name to the "Aykroyd":)
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Here ya go, I don't want you getting that image out of your head just yet!

5EYxIBk.jpg
 
Last edited:

Jhop

0
Joined
Sep 7, 2016
Messages
316
Points
0
If your TP starts coming up missing, you'll know where to look :crackup:
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
Oh Curtis my friend, I keep forgetting your a young one:whistle:
they started way before the movie on Saturday Night Live:)

Thanks Bowtie for always reminder:bowdown:
 
Last edited:

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,594
Points
113
I know, that film was released nearly two years before I was born. :p
I just looked up when Coneheads started. 1977! :whistle:
 

Jhop

0
Joined
Sep 7, 2016
Messages
316
Points
0
Oh Curtis my friend, I keep forgetting your a young one:whistle:
they started way before the movie on Saturday Night Live:)

Thanks Bowtie for always reminder:bowdown:

SNL is the start for many comedic actors, Dan Akroyd, Steve Martin, John Candy, Jim Belushi, Chris Farley, Adam Sandler, Will Ferril, to name a few
 




Top