Garoq
0
- Joined
- Aug 27, 2010
- Messages
- 1,525
- Points
- 83
Finally got around to finishing my first NDG7475 build the other night. Measured output was over 1.2W with a driver current of 2.2A. These diodes are not nearly as efficient as the 445nm diodes, and a small handheld laser gets hot pretty quickly. The beam however is truly amazing! :drool:
The build used the following:
• NDG7475 diode in copper module from DTR
• SL S4 host with extended and tapered copper heat sink
• SL 2.2A driver and pill module
• G-2 lens assembly with black anodized extended focusing ring
• External lens spring
• 2 x RCR123A/16340 batteries
• Silicone lens cap
Optional:
• Céramique 2 Thermal Compound
• Aluminum driver heat sink
• 2 x 18650 batteries
• Battery extension tube
Yeah it was expensive, but I had a good excuse because my wife wanted my 70mW PL520 build.

The build used the following:
• NDG7475 diode in copper module from DTR
• SL S4 host with extended and tapered copper heat sink
• SL 2.2A driver and pill module
• G-2 lens assembly with black anodized extended focusing ring
• External lens spring
• 2 x RCR123A/16340 batteries
• Silicone lens cap

Optional:
• Céramique 2 Thermal Compound
• Aluminum driver heat sink
• 2 x 18650 batteries
• Battery extension tube
Yeah it was expensive, but I had a good excuse because my wife wanted my 70mW PL520 build.
