Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Star Shower Taking A Part !!!

Joined
Oct 6, 2015
Messages
1,355
Points
113
Ok so today i purchase the Star Shower, I took it a part ( I Broke It A Part) and adjusted the power when i got it it was 42<mW green / Red 18<mW = After adjusting the TTL Or ( Potentiometer ).The Green is 217+mW /And Red 81+mW you can rotate the TTL or what ever its called potentiometer and make a choice to get more mW on Green or Red - :thinking:
 

Attachments

  • IMG_4924.JPG
    IMG_4924.JPG
    451 KB · Views: 602
  • IMG_4926.JPG
    IMG_4926.JPG
    516.3 KB · Views: 417
  • IMG_4927.JPG
    IMG_4927.JPG
    369.2 KB · Views: 472
  • IMG_4928.JPG
    IMG_4928.JPG
    400.2 KB · Views: 518
  • IMG_4929.JPG
    IMG_4929.JPG
    299.7 KB · Views: 400
  • IMG_4930.JPG
    IMG_4930.JPG
    317.1 KB · Views: 360
  • IMG_4931.JPG
    IMG_4931.JPG
    333.4 KB · Views: 369
  • IMG_4932.JPG
    IMG_4932.JPG
    322.6 KB · Views: 387
Last edited:





Joined
Dec 11, 2015
Messages
1,628
Points
113
Interesting finds, I would've expected a little bit more power on red, but I guess still reasonable

Out of curiosity, is this one of the projectors that spin or are a static layout of dots?
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
I missed this thread and it looks like others did also as there we many questions of this product. Well it seems to answer alot of questions. Alien Im guessing you broke it apart as it was made to be tamper proof.lol Over 200mw of potential green and IR.
 
Joined
Oct 6, 2015
Messages
1,355
Points
113
HeHe Yes it was glued and i did not have the screw driver some star screwdriver so i broke it a part the driver is amazing the red diode is gone and the green diode is gone i adjusted it over the limit must bin 300+mW it was soo bright i try testing it on LPM and never got the chance the diode never turned on again i was trying to get the diode out and remove the crystal and no chance its glued so i still have it i may try to heat up the glue and unscrew it :can:
 
Last edited:

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
HeHe Yes it was glued and i did not have the screw driver some star screwdriver so i broke it a part the driver is amazing the red diode is gone and the green diode is gone i adjusted it over the limit must bin 300+mW it was soo bright i try testing it on LPM and never got the chance the diode never turned on again i was trying to get the diode out and remove the crystal and no chance its glued so i still have it i may try to heat up the glue and unscrew it :can:
Alien use all the parts to make a Frankenstein laser:whistle:
 

djQUAN

0
Joined
May 27, 2013
Messages
1,154
Points
63
I think you are confused with TTL and potentiometer or trimmer.

TTL = transistor - transistor logic which refers to a 0V or 5V signal that turns the beam on or off.

A potentiometer (which is a control with a knob) is much like a volume control on your stereo. Turning it adjusts whatever it controls.

A trimmer is basically the same as a pot or potentiometer but does not have a shaft or knob. It usually has a slot or a screwhead for a screwdriver to fit into for adjustment or fine tuning then left alone once set to the proper point.
 




Top