Sold

[DTR]

1.mark-in-dallas
2.yobresal
3.yobresal

 

[mark-in-dallas]

Re: $110 Blowout 1.3W-1.5W Flexdrive Coin modded Hotlight Kits

Alright dangit, I'm in for one. It's not my favorite host, but I figure at that price I can't pass it up, and figure I could drop it into something else if I really wanted to..

And while I'm at it, got anymore NJG 18's or even an AK-007 or 2 you'd be willing to sell. I know I can get the AK's from Deal Extreme, but I need one now and don't want to wait a month for it. And what the hell while I'm at it I'll take two 445nm diodes from you too.

So, let me know what you've got, and what I owe you and I'll paypal it over.

BTW, with the last NJG/445m combo I got from you, when I set it in my Sipik and screwed everything together I had no output, so upong taking it apart I found the negative lead from the driver to the diode had detached fromt the driver. I soldered it back in but still have no output, I pulled it back out and tried powering it with my power supply, but there is no current flow. Any thoughts on what the issue might be?



Thanks,

Mark

 

[DTR]

Re: $110 Blowout 1.3W-1.5W Flexdrive Coin modded Hotlight Kits

Mark I have one last NJG that is already set up as a Sipik drop in. But shoot me back the other drop in that the wire came off of and I will repair it for you if possible.:beer:

PM incoming.

 

[yobresal]

Re: $110 Blowout 1.3W-1.5W Flexdrive Coin modded Hotlight Kits

I'll take the other 2 if they are still available.

 

[DTR]

Re: $110 Blowout 1.3W-1.5W Flexdrive Coin modded Hotlight Kits

You got them.

All gone. I knew that would be quick.

 

[mark-in-dallas]

Re: $110 Blowout 1.3W-1.5W Flexdrive Coin modded Hotlight Kits

DTR, I responded to your PM and paypaled the money. But, on the other diode/driver combo the wires remained attached to the diode, just the negative lead on to the driver came off. I soldered it back on but get 0 output. I guess I could detach both leads from the driver and test the diode and driver separately, but that negative one is a bitch! Still want me to send them back?

 

[DTR]

Re: $110 Blowout 1.3W-1.5W Flexdrive Coin modded Hotlight Kits

Yep I have a lot of experience with these drivers and good equipment to test it. I am hopeful that I can get it going for you again.:beer:

 

[mark-in-dallas]

I received the HotLight kit yesterday, and dtr had already assembled it for me with the flexdrive coin mod heatsinked. Awesome! Thanks dtr.