SOLD The simple light show :)

[AnthoT]

I have this simple light show I just completed with the kaleidoscope optic I got
it will be 50$ but I am open to offers aswell

It's pretty much only the parts cost
Diode 8$
Box 10$
Heatsink 5$ each
Driver 8$
Module 4$
Lens 4$
Fan 4$
Mirror on fan ~2$
Heatsink for driver 5$
kaleidoscope optic 8$
Total of 58$

Here's some pictures ( there is also a green DPSS 100mw laser which had a faulty driver, I replaced it with an AtMaLinear & it worked but stopped after I installed it, it may be repairable but I'm not charging for it )

That's the inside, there is also a dicro for combining red & green but as stated the green is not working at the moment. The linear driver for red is heatsinked to a HUGE aluminum heatsink, this I've run for ~20 minutes & it never even got warm

That's the effect with the kaleidoscope lens in place

That's the barrel jack ( you need a 8-14V power supply or can be included for 7$ )

The box itself

If you remove the kaleidoscope optic it looks like that
And of course if you remove the module you get a bunch of other stuff, heatsinks, drivers, optics, dicro, fan

Alright so it will be 50$ + 5$ shipped in Canada ( tracked, yes it's discounted )
And 50$ + 10$ shipping in US ( also tracked & insured ) this will get by international customs no problem as its not handheld ) international PM me for a quote
It will be packaged well inside a box with plenty of bubblewrap
PM me or post below if interested
:thanks: for looking

 

[AnthoT]

Re: FS:The simple light show

Today only,

50$ shipped in Canada or US Fees included

International PM me there's a special for you too

 

[eytyxhs]

Re: FS:The simple light show

Awesome deal! Good luck buddy! :beer:

 

[AnthoT]

Re: FS:The simple light show

Awesome deal! Good luck buddy! :beer:

Thanks! I want some more "hobby" money in the PayPal hopefully it goes soon

 

[AnthoT]

Re: FS:The simple light show

Alright, for the rest of the day ONLY it'll be 30$ + shipping

I need the stuff to go fast

 

[InfinitusEquitas]

Re: FS:The simple light show

Alright, for the rest of the day ONLY it'll be 30$ + shipping

I need the stuff to go fast

Done... PM incoming.

Edit: PM sent. I have a bunch of optics to add to this

Double Edit: Really wish more things like these came up for sale. Pointers are awesome, but honestly, I'm at the point where they no longer cut it for me.

 

[AnthoT]

Re: FS:The simple light show

Done... PM incoming.

Edit: PM sent. I have a bunch of optics to add to this

Double Edit: Really wish more things like these came up for sale. Pointers are awesome, but honestly, I'm at the point where they no longer cut it for me.

:thanks:

Ill pack it up as soon as you send payment & it'll be in the mail tomorrow

 

[InfinitusEquitas]

That's the barrel jack ( you need a 8-14V power supply or can be included for 7$ )

Really wish I had read through the listing more thoroughly before :banghead:

 

[AnthoT]

Really wish I had read through the listing more thoroughly before :banghead:

Oh, sorry about that I shouldve mentioned it in the PM, I did mention it in the thread I could've included it for 7$ but here is one close to you 9 VDC 1000mA regulated switching power adapter - UL listed ID: 63 - $6.95 : Adafruit Industries, Unique & fun DIY electronics and kits
it will work perfect for this its actually the exact one I had

Did it arrive safely? No damage, it was tough to fit more bubblewrap in there

Or even some wall phone plugs work, as long as it can give enough current to power the fan & driver

Since I didn't mention the power supply in the PM I'll send it to you for 7$ shipped still, but no tracking, and 4-7 day if you want expedited let me know.

I'll PM you

 

[InfinitusEquitas]

I have this simple light show I just completed with the kaleidoscope optic I got
it will be 50$ but I am open to offers aswell

It's pretty much only the parts cost
Diode 8$
Box 10$
Heatsink 5$ each
Driver 8$
Module 4$
Lens 4$
Fan 4$
Mirror on fan ~2$
Heatsink for driver 5$
kaleidoscope optic 8$
Total of 58$

Here's some pictures ( there is also a green DPSS 100mw laser which had a faulty driver, I replaced it with an AtMaLinear & it worked but stopped after I installed it, it may be repairable but I'm not charging for it )

That's the inside, there is also a dicro for combining red & green but as stated the green is not working at the moment. The linear driver for red is heatsinked to a HUGE aluminum heatsink, this I've run for ~20 minutes & it never even got warm

That's the effect with the kaleidoscope lens in place

That's the barrel jack ( you need a 8-14V power supply or can be included for 7$ )

The box itself

If you remove the kaleidoscope optic it looks like that
And of course if you remove the module you get a bunch of other stuff, heatsinks, drivers, optics, dicro, fan

Alright so it will be 50$ + 5$ shipped in Canada ( tracked, yes it's discounted )
And 50$ + 10$ shipping in US ( also tracked & insured ) this will get by international customs no problem as its not handheld ) international PM me for a quote
It will be packaged well inside a box with plenty of bubblewrap
PM me or post below if interested
:thanks: for looking

Guys if anyone is interested, $50 shipped, anywhere in the US, with the power supply. I hate having laser stuff just sit around