SOLD Pure Ghetto, Red Laser SOLD

[daguin]

SOLD


I ran across this again this afternoon. I worked on this, back in the day, when I was still trying to figure out which end of the soldering iron got hot. I assembled it with ghetto, trash pieces, but it worked

In any event, I figure somebody wants/needs red light for cheap

It has no aperture cap. It is jumper wired to run. It is fixed focus (and not necessarily too well) . It runs on two C-cell batteries. The top 1/2 of the button is cut off. The LED doesn't line up very well with the hole. It runs about 150mW-160mW. It will burn dark stuff *IF* you use an external lens to focus it

Anyway . . .
If ghetto red is good enough for you,
The first PM with $10 in their PayPal account gets it

Peace,
dave

 

[lazeerer]

Re: Pure Ghetto, Red Laser $10

ill take it,

 

[bennett326]

Re: Pure Ghetto, Red Laser $10

ill take the scientech for $10!!!! :crackup: :crackup:

 

[daguin]

Re: Pure Ghetto, Red Laser $10

ill take the scientech for $10!!!! :crackup: :crackup:

I've got one on the floor here without a calorimeter (head), that I'll let you have for $50, plus shipping.

You'll have to watch eBay for an affordable head and then calibrate it.

I'll send you a copy of the manual so you can do that.

If you are patient, you can have a good LPM for ~$100

Peace,
dave

 

[bennett326]

Re: Pure Ghetto, Red Laser $10

I've got one on the floor here without a calorimeter (head), that I'll let you have for $50, plus shipping.

You'll have to watch eBay for an affordable head and then calibrate it.

I'll send you a copy of the manual so you can do that.

If you are patient, you can have a good LPM for ~$100

Peace,
dave

:thinking: damnit dave why why? you just had to have one if no one else sneaks it out from under me ill try to take it within a couple weeks (i have to buy a few things first) ill let you know ASAP but it will be a few weeks at least :beer:. thanks for the awesome offer

 

[BShanahan14rulz]

The connector on the end looks like an S-video connector. You should take some measurements, maybe you can make a better interlock "key" :yh: