Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

SOLD: LaserBee IX 2100mW + DIY case

Arayan

Arayan

0
Joined
Oct 26, 2009
Messages
1,746
Points
48
The object is near new and I sell for XXX without the shipping costs!
The reason is because I want to buy the Laserbee II deluxe ;)

attachment.php






Specifications

Power Supply: 7-12 Volts DC (9Volt Alkaline Battery recommended)
Sensor: Thermopile (by J.BAUER Electronics)
Sensor Area: 8mm x 8mm (64 square mm)
Response Time: 10-15 Seconds
Sensor Cable Length: 10.0"
Thermopile Dimensions: 1.65" x 1.50" x 1.00" (W x L x H)
Power Range: 5mW to 2100mW in 1mW increments
Power consumption: 5.0 milliamps @ 9vdc (PCB + Backlight OFF)
Power consumption: 18.0 milliamps @ 9vdc(PCB + Backlight ON)
Total Dimensions: 2.55" x 1.90" x 0.95" (Including LCD)
Without the data log
 

Attachments

  • Pic1.jpg
    Pic1.jpg
    495.9 KB · Views: 1,007
Last edited:





Re: FS: LaserBee IX 2100mW + DIY case

In case any potential buyer is not sure... I will supply Customer
Service to whomever purchases this 2.1W LaserBee IX as if
they bought it directly from us...

Good luck with your sale....;)


Jerry
 
Last edited:
Re: FS: LaserBee IX 2100mW + DIY case

lasersbee said:
In case any potential buyer is not sure... I will supply Customer
Service to whomever purchases this 2.1W LaserBee IX as if
they bought it directly from us...

Good luck with your sale....;)


Jerry
Click to expand...

Thanks Jerry, I truly appreciate this treatment :)
 
Re: FS: LaserBee IX 2100mW + DIY case

Is it possible to connect this meter to a DMM and get a voltage reading corresponding to the output power? I will need this for data logging purposes.
 
Re: FS: LaserBee IX 2100mW + DIY case

drummerdimitri said:
Is it possible to connect this meter to a DMM and get a voltage reading corresponding to the output power? I will need this for data logging purposes.
Click to expand...

I never tried it, but I turn your question to Jerry for more explanations.
 
Re: FS: LaserBee IX 2100mW + DIY case

drummerdimitri said:
Is it possible to connect this meter to a DMM and get a voltage reading corresponding to the output power? I will need this for data logging purposes.
Click to expand...

The LaserBee IX does not have a calibrated voltage output
to connect a DMM for data logging.
All the hard work of calibration and output to the LCD is all
done in the MCU's firmware.

You could send this LaserBee IX back to us to have the Data
Logging feature with the EagleEye software added.
If you are interested in that option you can contact me by PM...


Jerry
 
Re: FS: LaserBee IX 2100mW + DIY case

lasersbee said:
The LaserBee IX does not have a calibrated voltage output
to connect a DMM for data logging.
All the hard work of calibration and output to the LCD is all
done in the MCU's firmware.

You could send this LaserBee IX back to us to have the Data
Logging feature with the EagleEye software added.
If you are interested in that option you can contact me by PM...


Jerry
Click to expand...

I will definitely be purchasing an LPM from you sooner or later.
Just need to get my other expenses taken care of.
I will let you know when I have some hobby funds available.
 
Re: FS: LaserBee IX 2100mW + DIY case

It should be noted that this is one of our Higher End
LaserBee products with a faster sensor respond time
than our entry level LaserBee USB and LaserBee A
models.

Jerry
 
Last edited:
Re: FS: LaserBee IX 2100mW + DIY case

I removed the price and I consider reasonable offers!
 
Re: FS: LaserBee IX 2100mW + DIY case

What was the price initially though? Most people like to have a baseline to go off of in terms of offers.

Otherwise I'll take it for $50 shipped:)
 
Re: FS: LaserBee IX 2100mW + DIY case

InfinitusEquitas said:
What was the price initially though? Most people like to have a baseline to go off of in terms of offers.

Otherwise I'll take it for $50 shipped:)
Click to expand...

OK :) I don't think to accept offers under 180 USD... excluding the shipping costs.
 
Last edited:
Re: FS: LaserBee IX 2100mW + DIY case

That is a Great Starting Price. This Should go quick.! With the faster response time and Being the IX plus the case.:)

You dont see meters like this start off at this price.

Nice Sale.::beer:
 
Re: FS: LaserBee IX 2100mW + DIY case

If I wasn't already committed to another LPM, this would be a no brainer.
 
Re: FS: LaserBee IX 2100mW + DIY case

lazeerer said:
That is a Great Starting Price. This Should go quick.! With the faster response time and Being the IX plus the case.:)

You dont see meters like this start off at this price.

Nice Sale.::beer:
Click to expand...

Many thanks for your kind support :beer:
 
Re: FS (offers): LaserBee IX 2100mW + DIY case

The ultimate :bumpit:
 
You must log in or register to reply here.


Back
Top