Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

SOLD 2,100mW 2.1W 445nm Black C6 Lasers $200-$220

yobresal

yobresal

0
Joined
Nov 5, 2007
Messages
4,919
Points
83
ALL SOLD. I have 0 more of these lasers currently for sale.
Specs are as follows:

Average Power output: 2,100mW (+/-100mW) measured over a 45 second test.
I have 1 at 2,200mW, 1 at 2,100mW, and 1 at 2,000mW.

Lens: High efficiency 405-G-2 lens

Diode: M140 445nm putting out over 2W at only 1.62A!

Driver: Mohgasm 1.62A thermal epoxied to aluminum chip and the pill.

Module: 12mm Copper

Heatsink: Black anodized Aluminum

Focus: Adjustable with use of anodized black matching focus adapter

Duty cycle: 90sec on/off (recommended) Let laser cool if it feels more than warm.


***Included extras***
2 Cell Battery Charger for 16340/18350 batteries
Tailcap lanyard for wrist
Belt holster case
2 IMR rechargeable 18350 batteries.
Free Priority mail shipping anywhere in the US.
(international customers add $33 for shipping)
Customer support, should it be needed as long as you own your laser

Price: SOLD shipped with everything included ($253 international) 3 remaining.

img1872gm.jpg

img1838q.jpg

img1871uf.jpg
 
Last edited:





Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Absolutely beautiful. Just stopped by to say hello and to thank you for your recent correspondence and assistance. These should fly out the door for sure! Chris
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Thanks bud, these are without a doubt my best and sexiest C6 builds to date. They don't get hot, thy have huge output, and I LOVE the copper module black aluminum heatsink combo. It looks slick.

Also anyone wanting to buy 2 price is $390 shipped. If you by the 2.1W you can hav the 1.2W for $90 more. So I am open to making deals with you guys.
 
Last edited:
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Nice lasers but is the 2100 mW able to handle that much heat? I recall my c6s to get pretty warm after 1 min at ~1.2 W
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Silvershot said:
Nice lasers but is the 2100 mW able to handle that much heat? I recall my c6s to get pretty warm after 1 min at ~1.2 W
Click to expand...

Suprisingly these 2.1W lasers are not producing much heat. The copper module helps out a lot. I have ran these for 90 seconds at a time and the host only feels slightly warm. That is why I have set the duty cycle at 90s. The 1.2W I am selling create much more heat an I recommend a 60 second duty cycle.
There are many variables that will determine how hot each individual laser gets besides the host used so just because your 1.2W C6 gets hot does not mean anything equal to or above that power will also get hot because it uses the same host.
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Noticed that did ya? Not sure if it will help to sell, BUTT It can't hurt
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Do less efficient diodes really result in a 900 mW drop in output, while requiring the same amps and duty cycle? This is all still new to me.

Edit: I feel that if it's that much of an efficiency difference, wouldn't the diodes life span also be shorter as well?
Not trying to make a Q&A out of your sale, sorry haha. I may be interested in one of the less efficient ones.
 
Last edited:
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

A big part of the different outputs is the 405-G-2 lens vs the 3 element lens. Otherwise it would be around 1600mW output vs 2100mW.
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

I'm interested in one of the lower performing ones. Does $125 include the charger?
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

yobresal said:
Suprisingly these 2.1W lasers are not producing much heat. The copper module helps out a lot. I have ran these for 90 seconds at a time and the host only feels slightly warm. That is why I have set the duty cycle at 90s. The 1.2W I am selling create much more heat an I recommend a 60 second duty cycle.
There are many variables that will determine how hot each individual laser gets besides the host used so just because your 1.2W C6 gets hot does not mean anything equal to or above that power will also get hot because it uses the same host.
Click to expand...

I have had several c6 builds some of which i sold. so i dont think efficiency is THAT important. what got me into thoughts is that a copper module transfers heat faster than aluminum, thus the host would feel warmer quick. and i have seen it myself. i guess the newest diodes are more than capable of 2W+ afterall. not trying to hijack here but it is a bit hard to believe.
 
Re: 2,100mW 2.1W 445nm Black C6 Lasers $220

Silvershot said:
I have had several c6 builds some of which i sold. so i dont think efficiency is THAT important. what got me into thoughts is that a copper module transfers heat faster than aluminum, thus the host would feel warmer quick. and i have seen it myself. i guess the newest diodes are more than capable of 2W+ afterall. not trying to hijack here but it is a bit hard to believe.
Click to expand...

I will make a video will a temperature gun on the host head to give you a better idea of what I am observing. I just need to borrow my dads temp gun so hopefully tonight. If not than in the morning.
 
You must log in or register to reply here.


Back
Top