Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

pre-order phr803  #5  sold out

Re: pre-order phr803 18$-ships anywhere #5

;DPAYMENT ;DSENT ;D
 





Re: pre-order phr803 18$-ships anywhere #5 15 left

Hey, great deal! I noticed there aren't any group buys for PHR going on, but this is pretty awesome :D

How much for 3x sleds in aixiz modules? You'll be shipping to Australia, so how much for that? :)
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

Could you hold one for me for about 3 days? depends on $$ status after I buy the x125..
Thanks, ArRaY
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

ndrew2505 said:
phr sleds: 18$ each
aixiz modules: 4$ each
harvesting fee per sled: 3$(i will also include the sled in the package after harvesting this time so you get the optics as well)

intl order shipping is included in price but if you want to upgrade to priority intl or registered mail it will cost extra.
Click to expand...
;)
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

Oh noes, MATH!!!!!!

Uh, uh... okay... ummm....

Lets see, I want 3 thingies. And they are 18 each... so you divide by the integral and differentiate it... crap, I forgot to multiply by the pi! Uh... okay, so, I think those first two cancel out, so just $50 I think... with a bazillion decimal places from the pi...

Oh wait, got to add the modules and the harvesting! But... already calculated, uh... so, I add these in, so that's like $12. No wait, $3, since I need to divide by 3 since I need to counter that multiplied by 3 thing until I put it in the equation... wait, is 12 divided by 3, 3? Yeah, it must be, otherwise 20 divided by 5 equaling 5 would be wrong, which I know it isn't.

So... okay, we have $50 divided by 3... that's, right I think. Since multiplying and division are the same thing, just gotta inverse. And I'm pretty sure inversing means dividing by itself, but that means it just equals 1! So okay, uh, I have $50 multiplied by... 1. I think. Or is it 0.3? I think it is. That's about... $12.


So $12 :) That's an awesome deal! I'll totally take that!
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

Paypal sent for 1 diode-harvested.
Thanks...
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

lmao not really. thats funny though. ;) 18x3=54+3x3=9+4x3=12. total of 75$ with shipping.
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

What are the specs for these? Are they better / brighter than the diodes in the PS3, because I was thinking of getting those.

Also, if I were to use one of these in a RGB setup, how much mW would the green and red need to be?
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

Nyla said:
What are the specs for these? Are they better / brighter than the diodes in the PS3, because I was thinking of getting those.

Also, if I were to use one of these in a RGB setup, how much mW would the green and red need to be?
Click to expand...

PS3 = 20mW (if your lucky) 803T = 150mW and a decent life ;D
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

But these are 'broken'?

I'm still quite new to this, but if i get one in a aixiz module, i can use that to make a laser pointer or use it in an RGB scanner, right? I assume I would need some kind of controller PCB to get the most out of it, would I need anything else, like a heatsink? What does the aixiz module do? Finally, with the right electronics, i could dim this right?
 
Re: pre-order phr803 18$-ships anywhere #5 15 left

Nyla said:
But these are 'broken'?

I'm still quite new to this, but if i get one in a aixiz module, i can use that to make a laser pointer or use it in an RGB scanner, right? I assume I would need some kind of controller PCB to get the most out of it, would I need anything else, like a heatsink? What does the aixiz module do? Finally, with the right electronics, i could dim this right?
Click to expand...
the sled itself is whats broken. i inspect all the sleds when i get them to make sure the diodes arent broken. if you drive these at a high current they will need a heatsink. if you plan to run them for a while theyll need a hs as well. aixiz modules are just a mount to hold the diode and the lens and yes you could make it dimmable by adding some electronics but thats what the experiments and modifications section is for. :) im updating the payment list now. ::)
 
Re: pre-order phr803 18$-ships anywhere #5 13 left

Can you provide heatsinks for these as well? I'm interested in 2-3 sets.
 
Re: pre-order phr803 18$-ships anywhere #5 13 left

Nyla said:
Can you provide heatsinks for these as well? I'm interested in 2-3 sets.
Click to expand...
im only selling the sleds/diodes and aixiz modules. there are other members of the forum that can help you. dark-horse makes custom heatsinks and drlava and rkcstr have very good drivers that work for red and blu ray diodes. you can also build your own driver with the ddl circuit in the experiments and modifications section.
 
Re: pre-order phr803 18$-ships anywhere #5 13 left

Hi, I just joined this forum today and was just very delighted to see this post..

Please reserve 2 x diodes harvested with Aixiz module.

$18+$4+$3 = $25 x 2 = $50.

Shipping to Singapore is included, right?

Thanks!!!
 
Re: pre-order phr803 18$-ships anywhere #5 13 left

Payment made via paypal for what I wanted up there, 3x diodes harvested and aixiz modulied ;)

Take your time with shipping, I don't need them quite yet :)
 
You must log in or register to reply here.


Back
Top