Polishing !!

[Alien Laser]

I have 4 of this hosts Kryton Groove 9mm diode hosts i like to finish 2 to shining finish what do i need to use i started doing it but takes forever is the a faster way or a different paste or something

 

[Deleted member 78982]

To begin with you have to insert the battery into the drill, then a lot of elbow grease

 

[Gryphon]

A buffing wheel on a bench grinder will be easier on your hands since you can use both to hold the host. Other than that it looks like you did manage to make a nice shiny spot already.

 

[Alien Laser]

Nice it taken me almost 15/20min to get this far and the battery discharged i will see to get a buffing wheel

 

[Ricker]

I use busches aluminum polish, always do it by hand but a wheel would definitely save some time.

 

[Alien Laser]

I use busches aluminum polish, always do it by hand but a wheel would definitely save some time.

Do you have a wheel i can send it too you to polish it i will pay you

 

[Ricker]

I do not, I use a couple microfiber cloths. But in all fairness I only polish my heatsinks that i just lathed. Not sure how much harder it would be to get the oxidation off after a long time. Might have to have a wheel.

 

[Alien Laser]

I will go purchase a wheel i just checked it's around $50. I would like to get a machine to make host's no idea where to start i see to send a massage to Ehgemus for 1/2 host's

 

[Ricker]

Just 10 grand you can get yourself a CNC lathe!!

 

[Deleted member 78982]

One wheel how this and the piece hard green color if apply before to polish the host

 

[GSS]

There are small hobby lathes that you can begin with.
The problem is that the tooling gets expensive. The minimal tooling that might come with a lathe just won't do enough as you get deeper into building.

 

[Alien Laser]

I Just polished this with hand i almost ripped mine skin of doing it
Look's nice i

 

[Ricker]

Looks great!!!

 

[Gryphon]

We need more hosts like that, it amazing!

 

[Alien Laser]

One wheel how this and the piece hard green color if apply before to polish the host View attachment 77804

I will get one. 2y ago i amputated mine thumb using a skill saw perfect cut it was hanging on skin i placed it back and align it on the bone it healed perfect, Imagine how fast this thing spins

 

[paul1598419]

I will get one. 2y ago i amputated mine thumb using a skill saw perfect cut it was hanging on skin i placed it back and align it on the bone it healed perfect, Imagine how fast this thing spins

Are you saying you never sought medical attention? That seems unlikely as you described it. A thumb holding on just by the skin is unlikely to reattatch by itself after being just being bandaged. Also, what did you do about the hemorrhaging? The thumb is pretty vascular and would bleed profusuley.