- Joined
- Feb 26, 2015
- Messages
- 1,359
- Points
- 0
yep for green laser if you past the 200mW marks the prcie should be alot more...
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
PLEASE help me find legitimate 200mw green laser pen
- Thread starter edocesrom
- Start date
yep for green laser if you past the 200mW marks the prcie should be alot more...
Idk, it looks intriguing. This too
New waterproof Blue laser 1W torch /focusable [OL-BLUW] - $54.99 : Zen Cart!, The Art of E-commerce
and
Golden Sun Powerful 2W blue laser 450nm laser torch/focusable [OL-2WBT] - $139.99 : Zen Cart!, The Art of E-commerce
If those produce anything near that wattage they're a bargain. I'm sure they do.
You're comparing two different things. Those blue ones are probably around what they're rated, but green is much more money. I doubt it puts out anywhere near 200mW, also I assume (if it actually puts out 350mW) its mostly IR.
- Joined
- Nov 14, 2015
- Messages
- 21
- Points
- 1
Sci-Fi lasers has what you're looking for but it's gonna be pricey.
I checked sci-fi and they only had the 520nm, not 532.
Razako
0
- Joined
- Mar 17, 2006
- Messages
- 4,301
- Points
- 113
http://laserpointerforums.com/f39/styropyro-s-liquidation-sale-96691.html
Styropyro is also selling a high powered pen.
Styropyro is also selling a high powered pen.
I saw styro's pen. The specs and price look good but it's all scratched up. I think I prefer the rubber finish. Cake, yours is rubber right? And do you think that clip thing will come off
Pman
0
- Joined
- Nov 28, 2012
- Messages
- 4,441
- Points
- 113
As promised I looked through my stuff and the bottom line is I only have a couple pen lasers that meats the criteria of just over 100mW subtracting the IR and I would thus not part with them anyways. All the rest I have are ones I purchased from laserbtb or someone else and are the ones I would "never" sell. I have others that would be over 100mW but they are not in the pen format so no dice there.
Are you certain the Styro one is scratched up? I cant tell that from the picture. I don't know about the optotronics one being sold and wether that one is scratched up or not. They are your best bets as far as getting an actual pen that outputs in hte 150-200mW area.
Don't be so quick to write off the O-like stuff. I've been satisfied with the things I've purchased from them and I would definitely NOT assume that the 400mW one they are selling will not meet its over 350mW rating. That being said, I don't know how it would output that much with the working current at under 500mA. My bet is they screwed up on that one and it's closer to the 200mW that you are looking for. The crown upgrade 500mW says it draws a couple amps in comparison. I know that I'm not the only one that got a crown upgrade 500mW 532nm from them and it was way overspec and a very nice looking unit. It's $240 right now. Show me someone else selling a legit class 4 532nm for that much.
I bought a wide beam 532nm from them just like this one that was over 100mW but now they seem to only have a 50mW one:
This red one was bought by a couple of us and we both measured just over 200mW and was only $26
.jpg)
Could have sworn a few people bought the 1W waterproof blue one for $55 but I never heard any review on it:
Honestly though the star of the specials is that crown upgrade 500mW 532nm even if it ended up below spec a bit for $240 They spec it at over 450mW. You can always ask if they guarantee that output.
I digress though. It's not easy to find a 532nm pen in the 150-200mW range now like it used to be.
If the module that Red bought can really output that high then that's the way to go if you have no interest in the 2 pens being sold right now. I have to believe my friend Red is telling the truth as I trust him. I just find it very hard to trust a seller that he actually has one that high. I'm assuming that includes the IR content. The question is do you actually own that module RED? Will add that laserlands has been OK by me so far and has a lot of great deals on the lower output diodes that we build with. I posted those bargains somewhere in another thread but I'm not sure anyone was really paying attention.
Are you certain the Styro one is scratched up? I cant tell that from the picture. I don't know about the optotronics one being sold and wether that one is scratched up or not. They are your best bets as far as getting an actual pen that outputs in hte 150-200mW area.
Don't be so quick to write off the O-like stuff. I've been satisfied with the things I've purchased from them and I would definitely NOT assume that the 400mW one they are selling will not meet its over 350mW rating. That being said, I don't know how it would output that much with the working current at under 500mA. My bet is they screwed up on that one and it's closer to the 200mW that you are looking for. The crown upgrade 500mW says it draws a couple amps in comparison. I know that I'm not the only one that got a crown upgrade 500mW 532nm from them and it was way overspec and a very nice looking unit. It's $240 right now. Show me someone else selling a legit class 4 532nm for that much.
I bought a wide beam 532nm from them just like this one that was over 100mW but now they seem to only have a 50mW one:
This red one was bought by a couple of us and we both measured just over 200mW and was only $26
Could have sworn a few people bought the 1W waterproof blue one for $55 but I never heard any review on it:
Honestly though the star of the specials is that crown upgrade 500mW 532nm even if it ended up below spec a bit for $240 They spec it at over 450mW. You can always ask if they guarantee that output.
I digress though. It's not easy to find a 532nm pen in the 150-200mW range now like it used to be.
If the module that Red bought can really output that high then that's the way to go if you have no interest in the 2 pens being sold right now. I have to believe my friend Red is telling the truth as I trust him. I just find it very hard to trust a seller that he actually has one that high. I'm assuming that includes the IR content. The question is do you actually own that module RED? Will add that laserlands has been OK by me so far and has a lot of great deals on the lower output diodes that we build with. I posted those bargains somewhere in another thread but I'm not sure anyone was really paying attention.
Last edited:
Sorry for the late reply my email didn't notify me. Yes it has a rubberized like texture that feels good in my hand. If you're worried about the clip breaking off, its held on pretty well but I wouldn't use it. If you are worried, I can give you an extra battery tube holder thingy i dont know what to call it.. The thing with the clip on it I guess. I'll include another one, I have another one on hand.
I actually want it off. It looks kind of funny so I would try to remove it. Maybe even grind it off if I have to and put a piece of tape there.
LOL. It wouldn't be a problem popping it off, I have one with it broken off. I broke it so its being super glued together so I'm not sending that one but I'll still send you the extra one.
Edit: I will send it still attached if you buy it
Second edit: both end pieces will be mailed still attached
Last edited:
Cool. I look forward to using it. Thanks for your help.
This guys a troll. I can show our conversation. I told him the deal was off due to misunderstanding on the price on his part, and he got rude and started trying to pressure me to buy from him (LOL) and then went off and contacted another guy I'm talking to. Unreal immaturity.
Please show the conversation. I asked Isaac Clarke and he said you weren't talking to him. Don't say your going to buy something from me and then not pay me. Thanks for wasting my time. I'm just trying to sell my laser and you waste my time completely. Please don't say your going to buy my laser and then try to buy someone else's. By the way, you said "na dude 100 tops lol. Ok 135" So if that doesn't say I will pay you the $135 I don't know what does. there was no misunderstanding on the price, you said you would pay me $135 and you never did.
Fool. Anyone can go back and look at the conversation and see. Pictures coming up.