Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

New to having nice laser what to do with it

Joined
Jul 8, 2012
Messages
1,772
Points
0
Its never safe unless the laser is under 5mW. What you are describing is called crowd scanning and while it is commonly done it is actually illegal and unsafe and not advisable.
 
Last edited:





Joined
Jan 29, 2011
Messages
150
Points
0
There lasers must be well over 5mw
If its illegal how do they get away with it ?
 
Joined
Jan 29, 2011
Messages
150
Points
0
They must not harm tho or not do enough damage to notice because im sure if people was going home blind something would be done about it
 

DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
They must not harm tho or not do enough damage to notice because im sure if people was going home blind something would be done about it

Lot's of sight damage can indeed go unnoticed. That does not mean it cannot show later.

Anyway .. scanned lasers might be powerful, but it's not about power, but power density. And since the power is spread over larger are as the beam moves, the actual power density might not (should not) exceed 5mW. Professional scanners have for example safeguards which turn them off instantly in case scanning mechanism jams. But that is also for fire prevention, as such scanners of go in several watts range.

So as usual .. good professional device with educated operators should pose no danger. And there always be someone who does something stupid.
 
Joined
Jan 29, 2011
Messages
150
Points
0
Both sides of the spread beam seem brighter in the videos
Obviously they carnt do damage to your eyes or they wouldnt be able to use them right?
 
Joined
Feb 22, 2012
Messages
130
Points
0
Justcody,

You could build a simple "lumia" projector with a piece of stippled clear glass or acrylic mounted to a very low rpm motor. Send the laser beam through the slowly moving optic and be amazed at the strange organic/animated scenery. You might vary the motor speed for curiosity's sake.

2c,
T.
 
Joined
Jul 8, 2012
Messages
1,772
Points
0
Justcody,

You could build a simple "lumia" projector with a piece of stippled clear glass or acrylic mounted to a very low rpm motor. Send the laser beam through the slowly moving optic and be amazed at the strange organic/animated scenery. You might vary the motor speed for curiosity's sake.

2c,
T.

Careful with eye damaging reflections with that method. It's in the basic idea of the randominity that makes it very likely that you will get unpredictable scattered reflections and some can be of dangerous density.
 
Joined
Jun 26, 2012
Messages
788
Points
28
Croud Scanning is a stupid idea with something of that power. Leaves yourself vulnerable for court cases.
 




Top