Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

new NUBM41 ?

Shmackitup

Active member
LPF Site Supporter
Joined
Aug 31, 2016
Messages
111
Points
28
So the ebay seller barnett_unlimited and stargazer are both scammers? Please tell me it's not true.. I need cheap diodes.. broke =/
I am certainly not a scammer!!!
 

Shmackitup

Active member
LPF Site Supporter
Joined
Aug 31, 2016
Messages
111
Points
28
As far as I know this ebay listing has been taken over by member "Shmackitup" who is abarnetts brother when abarnett was incarcerated and Shmackitup trying to make good on it.
It seems to be legit lately and and no complaints..
I have been doing this for 2 years now. My eBay username is barnett_unlimited and I have a 100% rating. I fully guarantee my products and will work out any problems should they ever arise.

I'm sorry that things happened in the past with my brother but if they hadn't I never would have got into this business. I'm here to help out the community. Let me know if you need anything.

Zach

:thanks:
 
  • Like
Reactions: GSS

badboybilly

Well-known member
Joined
Mar 5, 2015
Messages
1,325
Points
113
Hi,
This may sound funny but i bought diodes from AB a long time ago and all were on spot, maybe i just was lucky. And yes i heard the whole story behind it way back.

Rich:)
I had bought from him also, never had any issues!
 

GSS

Well-known member
Joined
Apr 28, 2015
Messages
3,950
Points
113
I have been doing this for 2 years now. My eBay username is barnett_unlimited and I have a 100% rating. I fully guarantee my products and will work out any problems should they ever arise.

I'm sorry that things happened in the past with my brother but if they hadn't I never would have got into this business. I'm here to help out the community. Let me know if you need anything.

Zach

:thanks:
My bad I thought you kept the same listing name and should of looked:):)
 

RedCowboy

Well-known member
LPF Site Supporter
Joined
Jul 10, 2015
Messages
7,460
Points
113

GSS

Well-known member
Joined
Apr 28, 2015
Messages
3,950
Points
113
Red, have you bought any of his G2 at $15 and any issue's as far as threading? Only asking because I think Sanwu's had thread issue's that weren't cut deep enough? or was it only on the 7mm barrel G7's?
 

RedCowboy

Well-known member
LPF Site Supporter
Joined
Jul 10, 2015
Messages
7,460
Points
113
I have had problems with sawnu G2 and G7, I had one that was not even 9mm but more like 9.5mm and would not thread, and another was broken at the o-ring groove.

The G7 Barnett sells is nice as you have more threads to work with, the only thing missing are the screwdriver slots, but the lens I just bought was here inside of 72 hours where from sanwu it's 3 weeks and no less price wise.

----EDIT----
I checked the threads into :

AIXIZ chrome module and they fit perfect
into the brass couplers I just got from Lifetime17 they fit perfect
into my square copper module it fits nice and snug with no problems
into the 12mm and 35mm DTR copper module it will not fit

I will order a M9 x 0.5 tap and see if that makes the difference with the copper modules, I think maybe the copper modules were a bit loose so they were ordered tighter but I am not 100% on that.







 

Attachments

Last edited:

GSS

Well-known member
Joined
Apr 28, 2015
Messages
3,950
Points
113
Thanx Red, perfect and everything I need to know. Was thinking the it could of been the same manufacturer of Sanwu's. Can't beat 3 days shipping either.
Thanks for going through the process of the lens lineup buddie:):)
 

RedCowboy

Well-known member
LPF Site Supporter
Joined
Jul 10, 2015
Messages
7,460
Points
113
I checked the Barnett G7 into an old 12mm DTR module that I recovered from a build that the diode gave up in and the lens fits it, it is snug but turns with my fingers no problem, but my most recent 12mm DTR modules will not thread it.

 

Attachments

Last edited:

GSS

Well-known member
Joined
Apr 28, 2015
Messages
3,950
Points
113
Huh? I gotta ask this stupid question then, was Sanwu the original source of G7's? I only have looked at them on Sanwu's sight and haven't looked on ebay, just came across them on barnnets sight. So who makes them?
Wasn't there also a mention a while back of Dtr's modules with some threading issue's?
 

Shmackitup

Active member
LPF Site Supporter
Joined
Aug 31, 2016
Messages
111
Points
28
Huh? I gotta ask this stupid question then, was Sanwu the original source of G7's? I only have looked at them on Sanwu's sight and haven't looked on ebay, just came across them on barnnets sight. So who makes them?
Wasn't there also a mention a while back of Dtr's modules with some threading issue's?
I bought bulk G7's from Sanwu directly so they're the same lens.
 

Shmackitup

Active member
LPF Site Supporter
Joined
Aug 31, 2016
Messages
111
Points
28
He sells them for this cheap because he is basically stealing from my mother. She enables him and buys him projectors..... it's a long story but I'm sure most of you have someone like him in your family.
 

BowtieGuy

Well-known member
LPF Site Supporter
Joined
Oct 14, 2012
Messages
5,590
Points
113
I have had problems with sawnu G2 and G7, I had one that was not even 9mm but more like 9.5mm and would not thread, and another was broken at the o-ring groove.

The G7 Barnett sells is nice as you have more threads to work with, the only thing missing are the screwdriver slots, but the lens I just bought was here inside of 72 hours where from sanwu it's 3 weeks and no less price wise.

----EDIT----
I checked the threads into :

AIXIZ chrome module and they fit perfect
into the brass couplers I just got from Lifetime17 they fit perfect
into my square copper module it fits nice and snug with no problems
into the 12mm and 35mm DTR copper module it will not fit

I will order a M9 x 0.5 tap and see if that makes the difference with the copper modules, I think maybe the copper modules were a bit loose so they were ordered tighter but I am not 100% on that.
Hi Red, if you're going to buy a 9.0 x 0.5mm tap, you may also think about getting a 9.0 x 0.5mm die, you won't use it quite as often, but they're nice to have around to fix a damaged or oversized lens holder. :yh:
 

GSS

Well-known member
Joined
Apr 28, 2015
Messages
3,950
Points
113
He sells them for this cheap because he is basically stealing from my mother. She enables him and buys him projectors..... it's a long story but I'm sure most of you have someone like him in your family.
Good to know about the G7's and solves my question:)
Yup, we all have someone in the family that has issue's and it's nice you can talk about it freely;) Just might get to you soon on a few lenses:)

Good thinking Bow as it would make things much easier if you have to come a across a lens that just doesn't quite fit:)
and Red, I can't say enough to just how much your setting up, pointers and pic's help:beer:
 
Last edited:

RedCowboy

Well-known member
LPF Site Supporter
Joined
Jul 10, 2015
Messages
7,460
Points
113
No problem GSS, I'm just reporting on what's in front of me, if these are sanwu then most should fit all modules, I likely just got one here on the thick side, no problem as I will use it with my nice new connectors from Rich/Lifetime17 :beer:
 




Top