i know hes out of business for bad business practice, my laser does ok, and i think all i need is a simple fix. i have the [SF*501B]*SF501B*445nm*Blue 2-2.4w model. problem im having is the focusing lens, its loose in the ring, and i can hardly ever get it to focus properly. How could i go about fixing this and where could i get one so i can use this thing right, thanks alot guys, you rock!
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Need a little help from a laser i bought from scifi
- Thread starter gtokie
- Start date
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,683
- Points
- 113
If it's just loose it the lens housing. Unscrew the lens flip it over there should be a tightening ring with a couple of slots. What I use is s tooth pick to tighten them up. Hope that works 
~~~~~ edit , make sure that no dust gets in torward the diode especially if it open can.
~~~~~ edit , make sure that no dust gets in torward the diode especially if it open can.
Last edited:
- Joined
- Oct 11, 2016
- Messages
- 807
- Points
- 43
Be careful when you do that^ to not unscrew it or all the lenses may fall out. Happened to me.
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,683
- Points
- 113
Your welcome, pay it forward
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
And don't get dust in there either, otherwise you may need to clean it with a drill press...
That's a joke btw OP, don't do that, I'm poking fun at Craz.
- Joined
- Oct 11, 2016
- Messages
- 807
- Points
- 43
Yeah don't do that either. ^ Bad experiences with these things.And don't get dust in there either, otherwise you may need to clean it with a drill press...
That's a joke btw OP, don't do that, I'm poking fun at Craz.
Last edited: