My BR laser PEN build.

[matrixcs]

this is the set of my PEN builds.

After reading and inquiring with some top builders here in our forum, i decided to venture in building a PEN type laser which i know is easy to build.

I have to builds... the Brass one which is powered via rckstr driver and a Chrome one which is powred with FLEXDRIVE.

here is the picture..

 

[jander6442]

How are you powering the one w/ rckstr driver

 

[matrixcs]

How are you powering the one w/ rckstr driver

for the one with the rckstr driver im using 2 10440 trustfire batteries

each battery has 3.6v 600mAh

so 2 batteries will have 7.2v @ 1200mAh

 

[jander6442]

schweet! Keep those run times down... those batt. I believe turned out to be more like 350mAh. I'm sure of this. I have found that if you top off charge them before you play they last longer other than that keep em commin

 

[bryce007]

for the one with the rckstr driver im using 2 10440 trustfire batteries

each battery has 3.6v 600mAh

so 2 batteries will have 7.2v @ 1200mAh

Full charge would be 8.4V, and you don't want it to go below 7V. I have the same pen setup, just make sure you check the batteries every once in a while.

 

[matrixcs]

hehehe its ok.. im not having problems at all...