brucemir
0
- Joined
- Aug 3, 2012
- Messages
- 1,213
- Points
- 113
Here are some more pics using my little aquarium. On the first couple I used hand helds with roughly the same amount of fog in the tank and the garage. The next few were using a 473nm 100mw and 30mw with the tank filled half way with water, and eventually filled the top with fog. I used the 30mw on the top, and with fog, it was brighter than than the 100mw thru the water. I then tried it again with two 589nm 50mw's. Kind of the same results. Lastly I used my PK2 projector with the tank half filled with water and different amounts of fog on the top half. They kind of look similar to what I tried last week, and the half fog / half water turned out only ok to me as when I filled the top with fog and kept it trapped, it was almost impossible to get a good exposure of both the fog and water as they brightness of each half was totally different. So most of the projector pics were of water and only a little fog. Enjoy.
Last edited:
