Material to build my 250mW Red Laser

[zoeid]

Once i've understood what glasses i must buy.
My Shopping List look like that:
Red Laser Safetly Googles 590-780nm
Driver for 200mW Red Driver
Ultrafire 18650 Lithium Battery whit charger

A lot of Diode 1N4001

1 Ω Resistors
An 5,6mm Aixiz Module holder

This and this is my Diode who was extract from my DVD Burner.
Is all Just? Can I follow this good topic? And this test load circuit?

Links are on blue word. Thanks for who help me. I'll give some +rep.

 

[ARG]

Yes, looks just fine. What speed burner did the diode come out of? It may be simpler to buy a LPC-826 diode as you may not get 250mW from that diode.

 

[zoeid]

Yes, looks just fine. What speed burner did the diode come out of? It may be simpler to buy a LPC-826 diode as you may not get 250mW from that diode.

It's too old, i really don't say, But it worked perfectly, before opening it.
I cannot buy a LPC-826 because laser of first class in Italy is prohibited and i think the office customs block it.
Edit: Now i'm looking for where is the diode. But i don't found. There is only one LED and many slides.
Some photo: 1,2,3.

 

[Blord]

Laserdiodes shouldn't be a problem when they are imported. It is the fully build portable laser that is prohibited.

You need at least 20x DVD-burner to get 250mW power. The only sure way is the LPC-815 sled or the lpc-826 diode.

Your red diode from the old dvd-burner will work but power is not guaranteed.

 

[zoeid]

Laserdiodes shouldn't be a problem when they are imported. It is the fully build portable laser that is prohibited.

You need at least 20x DVD-burner to get 250mW power. The only sure way is the LPC-815 sled or the lpc-826 diode.

Your red diode from the old dvd-burner will work but power is not guaranteed.

Many thanks for info. =)
I want to see how it is with this diode if I can pull it out.
If the diode don't work. I will buy what you describe.
Help me find the diode.

Edit: Now i'm looking for where is the diode. But i don't found. There is only one LED and many slides.
Some photo: 1,2,3.

 

[Haloid95]

Here is a LPC-815 sled that you can extract the 250mw diode from:

LPC-815 Sleds for draw out a 250mW Red Laser Diode/Lab | eBay

:beer:

 

[sinner]

http://laserpointerforums.com/f51/i-want-build-laser-thread-52972.html

heres a thread that explains it all..
hope that works out for you, good luck with your build

 

[zoeid]

Here is a LPC-815 sled that you can extract the 250mw diode from:

LPC-815 Sleds for draw out a 250mW Red Laser Diode/Lab | eBay

:beer:

I've found! There is another diode. I thought IR who is 4 pin.
I'll buy it if mine don't work propely thanks!

http://laserpointerforums.com/f51/i-want-build-laser-thread-52972.html

heres a thread that explains it all..
hope that works out for you, good luck with your build

I've already read that topic is too good.
Thanks you.