Looking for 5mW 532nm module - must be 11mm diameter

[siftf]

I need to buy about 30 green modules.
They are to go into an existing design with restricted space so cannot be more than 11mm diameter.
I have searched extensively and cannot find anything suitable so far - most low cost modules seem to be 12mm diam now which will not fit.

Last time I bought them from here:
green laser pointer, laser presenter, laser module,laser diode,Digi-Link Technology Co., Ltd.

Part number DLM-153-1102-205
($10 USD each a few years ago)

However I'm not sure that Digi-Link are still going - my emails to them bounce.

If anyone can point me to alternative suppliers, that would be great.
Thanks,
Simon.

 

[Encap]

Not much choice in the 11mm - here is one supplier: https://www.sparkfun.com/products/9906

 

[Pman]

I would buy one first as 15 a pop sounds like a lot. You could grind down a 12 but it may not make it through the procedure.

 

[crazyspaz]

I know lightvision sells some smaller modules, try them

 

[siftf]

Thanks for the responses. The Sparkfun module is in fact 11.5mm in the description and 12mm on the datasheet so probably too big.
But Lightvision look promising - I have contacted them.

Still be interested in other suppliers if anyone knows somewhere?

 

[Pman]

The modules in these are smaller and only require a single AAA. Most output 50mW or more from my experience, are easy to take apart and have a pot for output adjustment. I have probably purchased at least 30 of these in the past and pulled them apart to adjust the modules for max output and used them for other really small builds.

$9.23 5mW 532nm Stars Light Show Green Laser Pen - 3-mode laser effects at FastTech - Worldwide Free Shipping

 

[Deleted member 16589]

Z-bolt is really expensive but you can get custom modules from them.
Green Laser Modules - OEM Design & Manufacturing from Z-Bolt