Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

LG 8x Burner






Anyone got any advice on how to get the diode & heatsink out of the sled housing? The sled's from the LG BH08LS20. I've pretty much stripped it of everything else.
 
Crossfire said:
Anyone got any advice on how to get the diode & heatsink out of the sled housing? The sled's from the LG BH08LS20. I've pretty much stripped it of everything else.
Click to expand...

Just above the diode's heat sink is a little "notch" in the sled body. Cut through the body there. I simply use a small set of nippers, but a small saw or file would work as well. Once you have the body cut through, use a screwdriver blade to spread the notch apart. You should be able to push the heat sink with the diode still in it out of the body now.

There is some "glue" holding it in so give it a push. Just be careful to only push on the heat sink and be steady enough not to slip!



Spyderz20x6 said:
That they are coming out...
Click to expand...

Read through this thread

http://laserpointerforums.com/f38/pioneer-bdr-205-12x-blu-ray-burner-43688.html


Peace,
dave
 
Last edited:
I figured that out before you posted, Dave. However I think I damaged the diode because I got about 65mW through a 405-G-1 lens at the 290mA current setting.

At least it's better than the 5mW I got last time. I need to get better at diode harvesting.
 
You must log in or register to reply here.





Back
Top