- Joined
- Aug 25, 2010
- Messages
- 533
- Points
- 63
Hello!
Yes, not blinking, just impulsing is the correct term!
But ALL the big powered green lasers that I have buyed, form cheaper to expensive, show the same issue: impulsing for some seconds (5-10), then start at max power and so rest forever.
I use PANASONIC PRO POWER batteries not rechargeable, the best among the alkaline model. I'm scared about rechargeable batteries: Mr. Scott told me that often the rechargeable models has an output > 1.5 volts, and this can damage the laser diode.
In Italy I have found Duracell rechargeable batteries, but the output power is about 1.2, I think too low for my Hercules.
What is the voltage output of Tenergy Premium?
My room temperature is 23 degree Celsius, so it should be a perfect temperature for use my Hercules.
I have tried to use external power supply instead batteries, but I can see the same issue.
So, the temperature is ok, the power supply also, I hope that I do not have a faulty unit like my beam expander ;(
P.S.: I do not touch the current adjust screw in any way ... it's factory preregulated for the best results!
P.P.S.: the beam in your video starts good immediatly! It seems that not impulsing in any way. Have you pre-heated You Hercules before the video, or the videocamera
is not able to capture the small impulsing?
P.P.P.S.: http://www.amazon.com/Premium-Tener.../B0040IAZ0S/ref=pd_cp_e_0/182-8678350-1593735 here You can found a really good price for Tenergy batteries!
And this: http://www.amazon.com/Ansmann-54070...4?s=electronics&ie=UTF8&qid=1324694751&sr=1-4 is the best battery charger ever! What charger have You buyed?
Yes, not blinking, just impulsing is the correct term!
But ALL the big powered green lasers that I have buyed, form cheaper to expensive, show the same issue: impulsing for some seconds (5-10), then start at max power and so rest forever.
I use PANASONIC PRO POWER batteries not rechargeable, the best among the alkaline model. I'm scared about rechargeable batteries: Mr. Scott told me that often the rechargeable models has an output > 1.5 volts, and this can damage the laser diode.
In Italy I have found Duracell rechargeable batteries, but the output power is about 1.2, I think too low for my Hercules.
What is the voltage output of Tenergy Premium?
My room temperature is 23 degree Celsius, so it should be a perfect temperature for use my Hercules.
I have tried to use external power supply instead batteries, but I can see the same issue.
So, the temperature is ok, the power supply also, I hope that I do not have a faulty unit like my beam expander ;(
P.S.: I do not touch the current adjust screw in any way ... it's factory preregulated for the best results!
P.P.S.: the beam in your video starts good immediatly! It seems that not impulsing in any way. Have you pre-heated You Hercules before the video, or the videocamera
is not able to capture the small impulsing?
P.P.P.S.: http://www.amazon.com/Premium-Tener.../B0040IAZ0S/ref=pd_cp_e_0/182-8678350-1593735 here You can found a really good price for Tenergy batteries!
And this: http://www.amazon.com/Ansmann-54070...4?s=electronics&ie=UTF8&qid=1324694751&sr=1-4 is the best battery charger ever! What charger have You buyed?
Last edited: