Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Laser button burned my finger.

L

Lev

0
Joined
Jan 12, 2012
Messages
4
Points
0
hi, i was trying to get this laser i bought during the summer to work after i finally bought rechargable AAA batteries. After i put them in i pushed the button and i heard a sizzling sound in the laser, then i held the button down for a few seconds and the button got really hot and burned my finger slightly and i immediatly droped it like if i held my finger on a hot pan over an oven. The laser does not work though so i think the laser is broken, I couldnt find anything about the button heating up so i signed up for this website to see what experts will say about it, thanks.
Additional information, its a 532nm + 10 class III laser product and 30 mW. it was cheap but amazed me the night i bought it.
 
Last edited:





Sounds like a direct short with the battery, the laser could still be fine if the short problem was removed.
 
A "short" is when the electricity in a circuit takes the "short" path to ground - in other words something connected that should NOT have. Instead of the electricity going around in the circuit where it should and being properly controlled, two (or more) things connected/touched that should not have and are causing the problem.

Depending on what things have shorted your laser may or may not be salvagable. I would recommend you see about contacting someone for repairs if possible if the laser was expensive. Lasers are tempermental devices which do not like to be poked around in by someone unfamiliar with electronics.
 
Sigurthr said:
A "short" is when the electricity in a circuit takes the "short" path to ground - in other words something connected that should NOT have. Instead of the electricity going around in the circuit where it should and being properly controlled, two (or more) things connected/touched that should not have and are causing the problem.

Depending on what things have shorted your laser may or may not be salvagable. I would recommend you see about contacting someone for repairs if possible if the laser was expensive. Lasers are tempermental devices which do not like to be poked around in by someone unfamiliar with electronics.
Click to expand...

Ok thanks, Ill probably just buy another one thanks.
 
Looking at it now, looks like a battery might have leaked in it, i see that theres a battery acid stain on both sides of the laser inside and outside the battery tube, Probably from leaving a battery in it for a few months.
 
Yep it's always a good idea to remove the batteries when you are not using the device.
Also a direct short on the battery could have caused it to over pressure and leak.
 
You must log in or register to reply here.


Back
Top