hello. I faced problem with microchip laser. I used 1 cm nd yag laser crystal with passive cryag modulator. End pump configuration was used for experiment. I'm getting laser beam, which have extra intensity on the side of the beam ( in picture its marked as a red circle). Why such thing is happening? Could it be that pump diameter is much bigger than a stable mode in laser crystal? Thanks!
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Laser beam defect
- Thread starter Noncasltu
- Start date
- Joined
- Sep 20, 2013
- Messages
- 17,544
- Points
- 113
Except for not trailing off as fast as you would like, it looks to have a very Gaussian beam. Why is this small thing a problem for you?
Well, it doesn't look ok for me, and i would like it to be exact as gaussian beam. But i'm not sure why its happening like that. Does any one know why its happening? Or know literature where i could find information...
Alaskan
0
- Joined
- Jan 29, 2014
- Messages
- 12,025
- Points
- 113
I've seen this kind of problem with RF carriers on a spectrum analyzer, sometimes it's really there, sometimes it's the filtering in the analyzer which is too wide. However, with an optical sensor like you are using, I don't believe they have resolution bandwidth filter adjustments.
