Jetlasers pl-c 532/400 pgl

[hakzaw1]

YET ANOTHER 18650 Jetl Pro laser.
See the metering pics below - beam shot will be added asap.
Overspec on all three meters->100mws on Alpha-Lasersbee1 and Kenometer Lite.

ONE MINUTE tests- all show peaks well over 500mWs.

The same fine quality as other Jetl lasers.

Shock and water resistant- Ir filtered and FDA compliant.
Shutter in front and two keys- one circular (altered to be removable in the 'on' position) dongle pin for the tailcap. Good duty/rest cycling of 3 min on and 1 min off dependant on ambient temp. I never run one more than one minute.

Machining and threads excellant. Very stable and nice beam profile. Fully focusable and smooth movement. Very hot laser- will burn and cause eye injury if not used properly- viewing off a white surface is painfull and accidental reflections should be avoided.

Was delivered to Texas from China in three days by DHL!

This laser is being offered FS in the Pro shop. I want to keep it but need the money for my RGB projector.

 

[Dawinzi]

hak, do you still have it to sell ?

 

[JETLASERS]

Thanks Hak and the laser is so flattered to be tested upon three meters. :gj: I found Alpha responds kinda a lot slower than other meters coz it usually takes quite a while to rise to the stable power level.

Thanks again and jetlasers is also checking some returned 532nm lasers and hope to cause less inconvenience and trouble to every one.