Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

im building again my 2nd blu-ray laser! i have new

Re: im building again my 2nd blu-ray laser! i have

Rog when i put a load the voltage measurement became 4.2v but remain the needed current, so why the voltage drop, i use a zombie BR LD on its load and the voltage from 4.98v down to 4.2v, measurement across zombie BRLD using DMM. hows this.?
 





Re: im building again my 2nd blu-ray laser! i have

hi Rog what was the maximum power can be when im using 7805 LD driver in a BLURAY laser? is there a higher chance to get higher 10mw using that driver, actually im using 2pcs of RCR123A at total of 7.2v nominal 7.5v. can you give me an idea how to work with this? thanks.
 
Re: im building again my 2nd blu-ray laser! i have

Hi chido or gazoo, do have some guide on how to work with 7805 regulator to drive PS3 BRLD? how much power output it can give using this 7805? i need reference. thanks.actually this is my host...
 

Attachments

  • New_bluray_mod_case.jpg
    New_bluray_mod_case.jpg
    115.4 KB · Views: 265
Re: im building again my 2nd blu-ray laser! i have

this is where the cicuit is....apologize for the image quality...
 

Attachments

  • 022520082261.jpg
    022520082261.jpg
    131.2 KB · Views: 238
Re: im building again my 2nd blu-ray laser! i have

hi rog, do you have an idea of the output can be given by PS3 BLURAY or BLURAY burner using this 7805? what was the maximum output power possible using 7805 regulator, please help on this part, thanks.
 
Re: im building again my 2nd blu-ray laser! i have

hey i saw one in the youtube he call it surefire blueray pointer, he actually use 2 ultralast RCR123A, but i dont know what is the possible driver did he use for that, any ideas guys, i know i have lot more things to learn here. please bring me to the right path.
 
Re: im building again my 2nd blu-ray laser! i have

hey guys any body knows what driver did they use for the pen style bluray on ebay? cuz the unit used only 2 pcs AAA size 3.7v battery on it.... :-/ any idea guys..i need help again... thanks.
 
Re: im building again my 2nd blu-ray laser! i have

hi rog, do you have an idea of the output can be given by PS3 BLURAY or BLURAY burner using this 7805? what was the maximum output power possible using 7805 regulator, please help on this part, thanks.

The problem is I made my 7805 pointer a long time ago, all I really remember is that I got it to lase point then added another 10ma. If I measured the voltage I don't remember what it was, sorry :-/
Think of it this way, you are adjusting the voltage but are using the current as your reference point. You should be able to adjust from zero ma to something over 40ma then you should be good to go with fitting the LD, if you measure 40ma as your minimum there is something wrong.......

he actually use 2 ultralast RCR123A

That is what I use.


Hope that helps

Regards rog8811
 





Back
Top