I need some lens springs

[i73770k]

So i'm doing my first 99% build by me laser, i got some aixiz 5.6mm module's from a member, i'm also trying to get a diode press from a member..
I sent a PM to Flaminpyro but it has bin three days and he has not got back to me So if any of you know were i can get a press, other then survivallaser.. that would be grate.. Anyway i'm getting a fake G-2 lenses and i will need some lens springs, I like the internal ones so that's what i would like to get. But i cant find anything on them??

Thanks

RJ,

 

[Shakenawake]

I personally find the lens springs dont help me much, I find thread seal tape, aka teflon tape to work muck better.

I'm not really partial to mine so if you have trouble finding them elsewhere and really really want them, I'll send you mine if you just cover shipping. i think i have 3 of them

I'd offer to sell my diode press too but it's for 9mm diodes

 

[i73770k]

I personally find the lens springs dont help me much, I find thread seal tape, aka teflon tape to work muck better.

I'm not really partial to mine so if you have trouble finding them elsewhere and really really want them, I'll send you mine if you just cover shipping. i think i have 3 of them

I'd offer to sell my diode press too but it's for 9mm diodes

PM on the way..

 

[hakzaw1]

If you do use teflon be sure NO pieces of it come the threads and get lased as they will melt and do harm.. if you ever see some thing 'new' in the way of an new artifact etc stop and remove the lens to see whats happened- if the artifact moves when you focus then its something on the lens-- canned air can often fix this.. hope this helps- btw its AixiZ not aixiz- and all modules come with a spring --

 

[Pi R Squared]

Yes listen to hakzaw1, I also recommend keeping a lens cap on the lens when not in use unless you have a focus nob where one doesn't fit, some people have ruined a lens by burning something onto it, not just Teflon. I prefer the external springs from SL.

Alan

 

[Antharak]

RJ, don't be in such a rush. FlaminPyro is really busy. It's worth the wait as his work is topnotch. Try posting in his thread he may see it faster.
Good luck with your build.
Ed