- Joined
- Dec 26, 2012
- Messages
- 26
- Points
- 0
Help! I'm looking at the laser bee hlpm 2 . $69 for a lpm seems cheap.I dont want to spend hundreds on a meter. Has anyone had experience with this unit?
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
hlpm 2
- Thread starter jim wright
- Start date
DJNY
0
- Joined
- Nov 2, 2009
- Messages
- 5,991
- Points
- 83
Wrong section!
Had it some years ago, it´s good for starters, but when want to stay in the hobby, look for a better one. The HLPM2 only measures up to 200mW with a good accuracy.
Had it some years ago, it´s good for starters, but when want to stay in the hobby, look for a better one. The HLPM2 only measures up to 200mW with a good accuracy.
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
Thanks for stepping in DJNY...:beer:
As DJNY said it is an entry level Optical LPM Module.
If you are not measuring Lasers that output more
than 200 mW then it will work for you.
Look on our website or eBay for other LaserBee products
that can handle much higher output Lasers.
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
As DJNY said it is an entry level Optical LPM Module.
If you are not measuring Lasers that output more
than 200 mW then it will work for you.
Look on our website or eBay for other LaserBee products
that can handle much higher output Lasers.
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
- Joined
- Dec 26, 2012
- Messages
- 26
- Points
- 0
Thanks guys.I don't plan to measure more than 200 mW for now. I'm sure the more I work with lasers the stronger I will want.I'm in college and don't have a lot of money.
Where would a question like this go? I don't wanna keep screwing up.
Thanks
Where would a question like this go? I don't wanna keep screwing up.
Thanks
- Joined
- Dec 26, 2012
- Messages
- 26
- Points
- 0
Thanks guys.I don't plan to measure more than 200 mW for now. I'm sure the more I work with lasers the stronger I will want.I'm in college and don't have a lot of money.
Where would a question like this go? I don't wanna keep screwing up.
Thanks
Where would a question like this go? I don't wanna keep screwing up.
Thanks
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
I would have posted it in the Laser Measurements section...
Laser Measurements - Laser Pointer Forums - Laser Pointers and Laser Pointer info
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
Laser Measurements - Laser Pointer Forums - Laser Pointers and Laser Pointer info
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
- Joined
- Dec 26, 2012
- Messages
- 26
- Points
- 0
If I hit this thing with something higher than 200 mW will it fry it, or just not read? Id hate to burn it out with ir or something over spec.
Also can I move this thread ?
Also can I move this thread ?
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
If you go over the max rating you will overheat the
Optical Sensor and your readings will be off and far
from accurate.
If enough Laser generated heat is introduced you
could irreversibly Damage the Optical Sensor.
No... You need to ask a Mod or the Admin to move
a Thread.
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
Optical Sensor and your readings will be off and far
from accurate.
If enough Laser generated heat is introduced you
could irreversibly Damage the Optical Sensor.
No... You need to ask a Mod or the Admin to move
a Thread.
Jerry
You can contact us at any time on our Website: J.BAUER Electronics
