Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Help with my green laser.

cb19

0
Joined
Dec 5, 2011
Messages
65
Points
0
Ok guys i just got a 5mw green laserglow lyra and i was playing around with it and having fun. I put frst batteries in it and i can see the beam a little. Anyways i just had a question. When i was playing around with it i notice when i would aim the dot at the wall when i was close to the wall there was fuzz and little lines around the dot. Is this normal? I was just wondering. The picture will show it. Also in the picture if you look closely you can see above the green dot there is a smaller green dot that only my camera can picl up. Is this ir leaking? If you could please answer all these questions that would be great. Thankyou so much,
cb19
 
Last edited:





You need to upload a picture.
You most likely have dirt on the lens

Richard
 
C:\Users\owner\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\BUK2WJRB\photo.JPG
 
Last edited:
Here is the picture. The little green dot is above the main dot. Is this IR leakage?
 

Attachments

  • image.jpg
    image.jpg
    11.4 KB · Views: 138
If the small dot was IR it would be purple(to a camera). The fuzzy green dot looks normal. Do you have safety glasses? Try looking at the dot with them and you will see the true dot.
 
Last edited:
Ok that's what I thought.^^ I figured out it was dust too.:) I used a q-tip and it worked is it ok to use q-tips in the future? Or is that a bad idea?
 
q-tips can scratch the lens. be very gentle with them. Its made my problem worse so thats a good question.
 
I would recommend soft cloth for cleaning glasses.
They probably do the least damage to the lens...
 


Back
Top