Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Help!!!!! (Dorcy mod)

Joined
Nov 17, 2008
Messages
9
Points
0
I just bought a Dorcy Junior From Stonetek, and the a preassembled diode+housing thing (Along with the heat sink, the 6 ohm resistor, etc) But after I finished it, (I used Kenon's tutorial on Metacafe) the final product was less powerful than a common household pointer. Any suggestions? I could upload photos if they could help figure out what's wrong.   I think I just fried the diode.


If this sounds weird, sorry, I just registered like 5 minutes ago.  ;D

P.s, the housing and the flashlight were in the same bag when the Flshlight overheated (Like REALLY overheated) I had to wear gloves to take the batteries out and had to let it cool for at least ten min. Maybe that's why?
 





crocie

0
Joined
Oct 13, 2008
Messages
73
Points
0
yup, diode's dead mate :(

if you have a very dim light, thats the classic sign :(


ah well, experience is what you get when you didn't get what you wanted  ::)


btw, for next time, the laser diode's are very, very (VERY!) heat sensitive. Everyone usually ends up learning that the hard way though :p i blew my first one ;)
 
Joined
Nov 17, 2008
Messages
9
Points
0
Ok. This was like the first time ever- so i tried not to beat myself up about it. :'(


I do have a dvd player that I salvaged and I came up with a palm sized module with the diode in it. I'll try that. :eek:



If that doesn't work, I'll just buy one from nova lasers or something. :-/




Thanks,


Sciphii
 




Top