Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Heatsink for pen lasers

Damn, that is pretty ! :D I cannot wait, man ! Weeeheooooo ! I am gonna HAVE to get some X-Y scanner action going on soon - or I am gonna go nuts ! Like I said, (I forget the time difference) but email me the amount I owe you for shipping, and I will pay-apl you straight away ! Make sure to add on the 5% that Pay-pal takes - so that way you do not end up being robbed ! 8-)
 





So your saying you couldn't produce something like this with a lathe it would have to be poured into a mold or somehting?

Of course I'm talking about a lot more fins than what's depicted in the picture. I could just cut into it with a hacksaw couldn't I?
 
Yes, it could -- but a slitting saw and a dividing head would be a better choice, along with a cross slide mechanism.

Fun stuff, figuring out how to make things.

-- Chuck Knight
 
well the primary function of this heatsink I'm having made is to transmit the heat from the Aixiz module to the barrel of the flashlight. Since I'm also using it as a filler of space and is taking up the entire diameter of the flashlight barrel it is impossible to get airflow over the outside diameter and fins going around the circumfrence (spelling) would just trap the air and heat. by allowing the heat to rise out of the top of the barrel with fins that go up and down the spacer it will help some Drilling holes through the top to the bottom could also help but since there is a plastic endcap it's pointless anyway. I need to remove the heat by transmittion to the barrel of the flashlight where it will be wicked away by the air around the barrel. so no fins.

UNLESS...... I cut fins and holes in the barrel of the flashlight to allow for air movement. HMMM. will think on this.
 
Jase - it's Friday.....did you ship ? NOT that I am eager, or anything ! LOL !!!! IF you didn,t - no biggie, I can always just chew on my nails some more...I think I have one left
{yanking on feet to see if any nails are left...hmmmmm there's the pinky toenail....ow...stretching...not quite getting it.....THERE}
Okay, I am out of nails now - did it ship ? LOL !!!! ;D ;D ;D
 
Hi Greg.

I am off to the post office in about an hour to send them off, I am just packing yours and lee's sink now. I will give you your tracking info as soon as I get back.

Jase
 
Weeee-hoooo ! :-) Also - you had BETTER let me know what I owe you for shipping, mister ! You cannot be out of pocket on something like this - not fair to you, or your family !

;)
 
Shipping funds sent ! Thanks again, mate - I will post up tons of pics once it arrives :-)
 
Pleasure is all mine Greg. Your AC Lanling is gonna love it, 100% duty cycle is laser heaven...

Have fun.

Jase
 
Hey - I just checked the mail ! OMG !!!

It wasn't there :(

LOL !!! I am gonna go nuts waiting on this thing, man ! ;D ;D
 
Lol Greg Check your tracking number now, It is on its way to Texas. ;)

Now the wait is killing me just as much as you , Haha . Now get that Dremel all prepared with your polishing wheel and some WD40 to give that T-6 grade Aluminium a mirror finish.

Jase
 
Top man Jason ;)
Greg mine will be here by the latest monday ;D I'll torment you when it comes ;D It may even be here by the morning :D
 
YES , Torment. Chaos. wow USPS DC3 Spluttering across the Atlantic V 70 year old Drunk Postman peddling down some quiet Devon lane, this sounds interesting.

Jase
 
You must log in or register to reply here.


Back
Top