Handheld portable Spirograph

[tony70516]

Hey guys, this is my second spirograph, using a radioshack project box, i think dimensions are 2.5'' in height and width and 5.5'' in length. not positive i threw out the package. but it fits in my hand!
as far as wiring goes..
i have one switch and one pot for weach motor, same with batteries, its easier and i think more pattern designs when you can control one motor at a time.
the negative from the battery to the motor are together and just sitting not connected to anything else. the positive battery goes to the first lead on the switch. the other lead from the switch has a wire that goes to the pot. the positive from the motor goes to any other open lead on the pot. very simple.
Please note: i havent made something to mount the laser in, i just made a small hole just to show you the pics. kinda a work in progress. but everything else is done.
it took me about 4 hours to build (Nonstop) and its very lightweight!~. im very pleased with the results. please leave your feedback.

 

[DTMF]

i'm shure your very proud of your build but did you have to make 3 thread's for it ? how do you turn those tiny "pots" you must have tiny finger's

 

[tony70516]

i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha i posted 3 threads because nobody ever replies to my posts! it bothers me all im asking is for opinions. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine!

 

[lasersbee]

[quote author=DTMF link=1237254117/0#1 date=1237255375]i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha [highlight]i posted 3 threads because nobody ever replies to my posts![/highlight] it bothers me all im asking is for opinions. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine![/quote]

Poor Baby.... :'( :'( :'(

Posting the same thing in multiple treads is called SPAMMING...
or were you not aware of that practice... after being registered for only 210 days... :-?

That's already 5 times you posted the same thing...  in 5 different threads....

Maybe... no one is interested............. :'(

Jerry

 

[Hemlock_Mike]

HAha (as in the Simpsons) Your posts are hard to read.

Mike

 

[tony70516]

[quote author=tony70516 link=1237254117/0#2 date=1237255924][quote author=DTMF link=1237254117/0#1 date=1237255375]i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha [highlight]i posted 3 threads because nobody ever replies to my posts![/highlight] it bothers me all im asking is for opinions. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine![/quote]

Poor Baby....  :'( :'( :'(

Posting the same thing in multiple treads is called SPAMMING...
or were you not aware of that practice... after being registered for only 210 days... :-?

That's already 5 times you posted the same thing...  in 5 different threads....

Maybe... no one is interested............. :'(

Jerry[/quote]


oooooohhh tough guy over here talking smack through a laser forum. if only i could be as cool as you

 

[lasersbee]

oooooohhh tough guy over here [highlight]talking smack[/highlight] through a laser forum. if only i could be as cool as you

Stating Facts....

Your posting the same thread 5 times... all over the Forum is SPAMMING
and is frowned upon by the members here.... or perhaps you weren't aware.... :-?

Following the rules of the forum and using common sense will assure you a good reputation....


Jerry

 

[DTMF]

[quote author=DTMF link=1237254117/0#1 date=1237255375]i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha i posted 3 threads because nobody ever replies to my posts! it bothers me [highlight]all im asking is for opinions[/highlight]. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine![/quote]

your spiro look's like crap . there you have bin informed that's my opinion.

 

[bugattidude]

[quote author=tony70516 link=1237254117/0#2 date=1237255924][quote author=DTMF link=1237254117/0#1 date=1237255375]i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha i posted 3 threads because nobody ever replies to my posts! it bothers me [highlight]all im asking is for opinions[/highlight]. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine![/quote]

your spiro look's like crap . there you have [highlight]bin[/highlight] (<- nice spelling) informed that's my opinion.
[/quote]


its a good start.. mine was hot glued onto a piece of wood... n it looked like crap

 

[nikokapo]

[quote author=DTMF link=1237254117/0#7 date=1237305045][quote author=tony70516 link=1237254117/0#2 date=1237255924][quote author=DTMF link=1237254117/0#1 date=1237255375]i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha i posted 3 threads because nobody ever replies to my posts! it bothers me [highlight]all im asking is for opinions[/highlight]. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine![/quote]

your spiro look's like crap . there you have [highlight]bin[/highlight] (<-  nice spelling) informed that's my opinion.
[/quote]


its a good start.. mine was hot glued onto a piece of wood... n it looked like crap

[/quote]


Hey it does not look like crap! The wooden base gives it a "DIY" style I like

 

[tony70516]

[quote author=tony70516 link=1237254117/0#2 date=1237255924][quote author=DTMF link=1237254117/0#1 date=1237255375]i'm shure your very proud of your build but did you  have to make 3 thread's for it ? how do you turn those tiny "pots"   you must have tiny finger's  

haha i posted 3 threads because nobody ever replies to my posts! it bothers me [highlight]all im asking is for opinions[/highlight]. um the pots are pretty small but easy to turn i just put pressure and twist my finger, it works fine![/quote]

your spiro look's like crap . there you have bin informed that's my opinion.
[/quote]

Let's see you make a better handheld one dirtbag

 

[DTMF]

i'm not in to handheld spiro's . nor am i a dirt bag . here's my 4 motor spiro also take a look @ my custom heatsink's  little boy

 http://www.youtube.com/watch?v=Qt79b9_5iuc

http://www.youtube.com/watch?v=C4X8ae6aeXM

oop's how'd this get in here

 

[nikokapo]

oop's how'd this get in here

;D Well played good sir, one internet to you ;D

 

[tony70516]

i'm not in to handheld spiro's . nor am i a dirt bag . here's my 4 motor spiro also take a look @ my custom heatsink's  little boy

 http://www.youtube.com/watch?v=Qt79b9_5iuc

http://www.youtube.com/watch?v=C4X8ae6aeXM

oop's how'd this get in here

I like the heatsinks theyre pretty nice, i also like the spiro in action. but one thing yes while it is a very nicely done spiro your gonna sit here and tell me mine looks like crap? look at that thing yours looks like a childs toy. but it works. just like mine and thats all i care about.

 

[DTMF]

[quote author=DTMF link=1237254117/0#11 date=1237350327]i'm not in to handheld spiro's . nor am i a dirt bag . here's my 4 motor spiro also take a look @ my custom heatsink's  little boy

 http://www.youtube.com/watch?v=Qt79b9_5iuc

http://www.youtube.com/watch?v=C4X8ae6aeXM

oop's how'd this get in here

I like the heatsinks theyre pretty nice, i also like the spiro in action. but one thing yes while it is a very nicely done spiro your gonna [highlight]sit here and tell me mine looks like crap?[/highlight] [highlight]look at that thing yours looks like a childs toy.[/highlight] :-? :-? :-? but it works. just like mine and thats all i care about. [/quote]

you asked for opinion's you didn't say only post if you like it . i gave you MHO on your build sorry if it wasn't what you wanted to hear . yes it was at one time a child's toy " speak & spell " now it's a demon sound machine
http://www.youtube.com/watch?v=fKprClM0-To

 

[tony70516]

[quote author=tony70516 link=1237254117/0#13 date=1237413261][quote author=DTMF link=1237254117/0#11 date=1237350327]i'm not in to handheld spiro's . nor am i a dirt bag . here's my 4 motor spiro also take a look @ my custom heatsink's  little boy

 http://www.youtube.com/watch?v=Qt79b9_5iuc

http://www.youtube.com/watch?v=C4X8ae6aeXM

oop's how'd this get in here

I like the heatsinks theyre pretty nice, i also like the spiro in action. but one thing yes while it is a very nicely done spiro your gonna [highlight]sit here and tell me mine looks like crap?[/highlight] [highlight]look at that thing yours looks like a childs toy.[/highlight] :-? :-? :-? but it works. just like mine and thats all i care about. [/quote]

you asked for opinion's you didn't say only post if you like it . i gave you MHO on your build sorry if it wasn't what you wanted to hear .  yes it was at one time a child's toy " speak & spell " now it's a demon sound machine
http://www.youtube.com/watch?v=fKprClM0-To[/quote]

no i dont mind at all, i want these opinions to improve my ideas. but dont leave them in a nasty way. all i was saying was mine may not look too good, but neither does yours. but the thing is. they work so i dont care how it looks. my last one was placed in a box made of foam board, but it worked.