Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Goggles for BR

D

Droyd

0
Joined
Sep 1, 2008
Messages
126
Points
0
Would I need goggles for a 110mW BR if I'm safe and dont burn things with it.
Is it safe to look at the dot on dark non reflective surfaces outside?
If there necessary, where Can I get cheap goggles for BR
 





Droyd said:
Would I need goggles for a 110mW BR if I'm safe and dont burn things with it.
Is it safe to look at the dot on dark non reflective surfaces outside?
If there necessary, where Can I get cheap goggles for BR
Click to expand...

Do you have a very strong willpower?

To me, owning a high powered laser and not burning things seems like owning a gun and a range without ever shooting it. But that's just my opinion. thesk8nmidget has some great BR-specific goggles for sale, $35 each. I ordered 2 pairs, and they work great. You can find the thread in the Group Buy category, and a link is also in thesk8nmidget's signature.

I would highly recommend buying goggles. It is safe to look at dark non-reflective surfaces outside (not too close up), but goggles allow you to see optical effects, burn things safely, see fluorescence, and many more. Fluorescence can open up a whole new world; you will be surprised by how many things you can see fluoresce when you are wearing goggles!

-Mark
 
I agree with rocketparrolet, unless you don't have any desire to burn things. You could pop balloons by covering up your eyesand aiming torwards the balloon. Chances are you'll hit it. :D And no one can resist not writing on glow in the dark stuff. ;D
 
i have a pair of uvex cutting torch safety glasses that look like a reg pair of nice sunglasses that when i shine my 120 mw laser 405 nm only 1 mw comes through them  thats protection  ;)
 
But still, those only protect 400nm-532nm. Blu-ray laser tend to have wavelengths of 395nm-415nm. What if your laser happens to be under 400nm? The DL goggles are rated for protection against 190-500nm.
 
please make sure that they protect first . I have several sunglasses and or safety glasses and only [highlight]one[/highlight] pair work against bluray . remember you only have one set of eyes :P
 
Thanks for the reply.
Could you tell me the name of the model that works against blu ray and where you bought it?

Thanks again
 
i'll check when i get home tonight gotta work the weekend 12-14 hours today and tomarrow yay I love salary :P
 
My dragon goggles for green, also seem to work for BR. The spot from my 130mw Blu Ray becomes almost invisible when shone on my laserbee sensor.
 
PHR-803T said:
john_lawson wrote, that he uses uvex cutting torch safety glasses against a 405nm diode.

Would I be fine with those:

http://www.professionalequipment.co...de-ultradura-uvx-s3207&keyphrase=uvex-glasses

I'm assembling a Dorcy Jr. Mod, using a PHR-803T (80mA).

Thank you for your help
Click to expand...

You should be really careful about not using laser goggles. Laser goggles are specially coated for protection against concentrated light beams. They reflect and absorb most of the light. But using protection that is not rated for protection against laser beams can be taking a HUGE risk. If it is not made for relfecting lasers, it will bleach quicker under laser light. Even if only a small amount of gets through, it only takes about 6mW to do eye damage. If you get hit in the same spot twice, it would definately do damage. Even if you get hit for half a second, that's more than enough time to bleach the glass and get a direct hit in the eye. Blu-ray is much less visable than red or green (about 12x), so even if the dot looks weak, it could be a lot more than 10mW. Even indirect exposure to a laser dot at high powers could cause damage.

I just hope that you know what a huge risk this is, and you'll be extremely careful with it. If you ask my oppinion, my eyes are worth the extra money.

davidgdg said:
My dragon goggles for green, also seem to work for BR. The spot from my 130mw Blu Ray becomes almost invisible when shone on my laserbee sensor.
Click to expand...

Those are the ones I posted. ;D
 
You must log in or register to reply here.





Back
Top