RDTech
0
- Joined
- Apr 6, 2010
- Messages
- 265
- Points
- 28
SOLD, thanks - Enjoy
Last edited:
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
FS: 510mW, 445nm Jayrob 18650 Host w/ Cu heatsink
- Thread starter RDTech
- Start date
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
If it runs on a single 3.7V battery, the laser probably has a boost or flex driver in it.
You CANNOT power it with two CR123 batteries!
The voltage limit on the boost and flex is 5.5V. Two CR123's would be a minimum of 6V. With rechargeable 123's it would be even higher
Using 2 CR123's will burn out the driver
Peace,
dave
You CANNOT power it with two CR123 batteries!
The voltage limit on the boost and flex is 5.5V. Two CR123's would be a minimum of 6V. With rechargeable 123's it would be even higher
Using 2 CR123's will burn out the driver
Peace,
dave
Fonduman
0
- Joined
- Jun 12, 2010
- Messages
- 341
- Points
- 0
whats stopping you from increasing the power on it, unless you want 500mW specificaly? driver info would be handy too
RDTech
0
- Joined
- Apr 6, 2010
- Messages
- 265
- Points
- 28
It has a flexdrive v5 in it, you are welcomed to put it where you wish, It's just a small pot..
RDTech
0
- Joined
- Apr 6, 2010
- Messages
- 265
- Points
- 28
Price reduced to $250 shipped CONUS. Maybe I was too high. FONDUMAN was right, you can open it up and turn the flexdrive to whatever you wish at your own risk. It should reach 900-1000mW.
- Joined
- Jul 4, 2008
- Messages
- 2,036
- Points
- 48
Be careful-unless the driver is heatsinked turning it too high can damage it, especially with the flexdrive. I love this host though, it feels great!
