Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS: 405 & 635 Twins! 350mW each!

sassafrass686

Member
Joined
Jan 4, 2011
Messages
110
Points
18
For Sale: 2 Aurora SH-032 Lasers
Violet is Sold. The red one is still for sale!
These two are twins aside from wavelength. They both put out ~350mW. The actual output can be seen in the LPM charts below. After playing with them quite a bit I've found that they don't even heat up after a minute.
As seen in a few of the photos the focus ring is receded into the front of the host pretty far. It only protrudes a small bit and is focused to infinity.
The 405 runs on 2x CR123's at 380mA and the 635 runs at 640mA on 1x 18650. The red one appears much brighter in person however the violet looks brighter in the photo. The violet one will burn your skin or pop a dark balloon. They are both awesome lasers! This is my first sale here on LPF so I would happily use a middle man at the buyers expense if that is how they would like to do it.
Here are a few pics of the LPM's, hosts and beams.

The asking price is $150 each and this includes 2 CR123's or 1x 18650 depending on which laser you buy.
If you were looking to buy both, I would settle for $280 for the set including batteries.


Specs---------405nm---------635nm
Hosts--------------Aurora SH-032
Power---------345mW--------355mW
Current--------380mA---------640mA
Drivers--------Mohgasm Linear Driver
Batteries-----2x CR123-------1x 18650
Lenses---------AR Glass Lens - Coated for the correct wavelength obviously
Duty Cycles-----60/30-------40/30------On/Off
Switches--------Tail Clicky-(Glow in the Dark)


Please PM me or post any questions that you have! Also, remind me if I left anything important out.

Now for some pics.


LPM of the 405nm


LPM of the 635nm


Some pics of the hosts.




 

Attachments

Last edited:



sassafrass686

Member
Joined
Jan 4, 2011
Messages
110
Points
18
Thanks for the luck and the bump yesterday. Running the red at 1.2A would definitely decrease the life of the diode by 70% or more. But... DTR tortured one of them for 5 mins at 1.6A. Many others have pushed them too so I was just throwing it out there. Haha.
Like I said, I haven't done this, nor would I before trying to sell the thing, but I think its a safe thing to say, assuming the user knows that the diode won't last nearly as long. Hope that my thoughts aren't completely outrageous.
 

InfinitusEquitas

Well-known member
Joined
Mar 27, 2011
Messages
15,580
Points
113
IIRC DTR and others pushed theirs in TECs... in a small host you're going to have fast heat build up, so while the diode might survive for a while... You're really basically torturing it to death:p

Also if you push past ~900mA you'll see the diode becomes a whole lost less stable and starts to drop at about 1-2mW/s. So unless you happen to have a very efficient diode, I wouldn't offer the option. Just my $.02:)
 
Last edited:

offroadfreak8582

Well-known member
Joined
Oct 14, 2011
Messages
2,371
Points
83
Nice lasers here is a free bump :) offtopic: aint sassafras te main raw ingredient of xtc? Lol

Good luck with you sale!

Greetings,,
 

sassafrass686

Member
Joined
Jan 4, 2011
Messages
110
Points
18
Thankya
Sassafras is a root that is often extracted to make many different things. I don't think it has to do with ecstasy if thats what you were talking about? But I may be wrong!
 




Top