FS 10k scanners + DMX

[andy_con]

i might be looking to sell ym 10k scanners with dmx.

anyone interested for £60?

 

[lamborgini8]

Re: Feeler - FS 10k scanners + DMX

Where did you get them and do you have something to build them into that you don't mind selling?

 

[wesdaman14]

Re: Feeler - FS 10k scanners + DMX

yeah i would be intereted for 120$ usd
What all can a 10k do ??

 

[Chad]

Re: Feeler - FS 10k scanners + DMX

Hell yes!!

 

[MarioMaster]

Re: Feeler - FS 10k scanners + DMX

yeah i would be intereted for 120$ usd
What all can a 10k do ??

10kpps is really pretty much bottom end as far as galvos are concerned - you're pretty much limited to beamshows and some basic geometric shapes as far as actual image and animation is concerned

 

[andy_con]

Re: Feeler - FS 10k scanners + DMX

Where did you get them and do you have something to build them into that you don't mind selling?

well a metal housing and aluminium plate will be extra.

and yes 10k are bottom on the speed rating, they can do beam shows and simple animations

 

[andy_con]

Re: Feeler - FS 10k scanners + DMX

these are the 10k scanners in question, planning on upgrading to 30k, so wont need thr 10k anymore.

http://www.laserpointerforums.com/forums/YaBB.pl?num=1218488773

 

[lamborgini8]

Re: Feeler - FS 10k scanners + DMX

these are the 10k scanners in question, planning on upgrading to 30k, so wont need thr 10k anymore.

http://www.laserpointerforums.com/forums/YaBB.pl?num=1218488773

If the scanner you show in that thread is the one you are selling and your willing to sell the metal chassis as well, how much would you want for the lot?

 

[andy_con]

Re: Feeler - FS 10k scanners + DMX

well the housing is £10 from maplin and the alum plate is about £15-20

 

[lamborgini8]

Re: Feeler - FS 10k scanners + DMX

well the housing is £10 from maplin and the alum plate is about £15-20

Got a link to that? I have seen that housing posted about everywhere but never found it on maplin.

The scanner has ILDA right?

I think you may have yourself a deal then.

 

[thesk8nmidget]

Re: Feeler - FS 10k scanners + DMX

all galvo scanners are capable of "ilda"

all that means is you can wire it up to a ilda standard serial port.

 

[lamborgini8]

Re: Feeler - FS 10k scanners + DMX

all galvo scanners are capable of "ilda"

all that means is you can wire it up to a ilda standard serial port.

What I means was ILDA connections already set up, last thing I want is to have to play around with the 26 or so wires and connect them up myself.

 

[thesk8nmidget]

Re: Feeler - FS 10k scanners + DMX

[quote author=thesk8nmidget link=1225535636/0#10 date=1225566341]all galvo scanners are capable of "ilda"

all that means is you can wire it up to a ilda standard serial port.

What I means was ILDA connections already set up, last thing I want is to have to play around with the 26 or so wires and connect them up myself.[/quote]


the only way to get everything already wired for ilda and setup for you would be to buy a premade scanner.


with your scanners you will have a total of 4 signal wires that you will have to hook up to your serial port(ilda connector.)

1,14,2,15

 

[andy_con]

Re: Feeler - FS 10k scanners + DMX

well im keeping my existing metal housing and alum board.

if you want a housing and board, il go maplin and get one and get a alum plate cut.

you will have to do the rest, wire, cut holes etc...

if you want me to do that, thats gona cost more.

 

[lamborgini8]

Re: Feeler - FS 10k scanners + DMX

well im keeping my existing metal housing and alum board.

if you want a housing and board, il go maplin and get one and get a alum plate cut.

you will have to do the rest, wire, cut holes etc...

if you want me to do that, thats gona cost more.

Hmm, well I think I am going to leave this one for now.

 

[andy_con]

Re: Feeler - FS 10k scanners + DMX

if you want a box all set up so all you have to do it put a laser in, its gona cost.

but the cheap way is for you get set the case and do it your self, its not that much work