- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
Parts:
2x 5.25" Floppy drives - the kind with the nice stepper motors
1x Parallax BASIC Stamp II Microcontroller
1x Laser
2x Mirrors
1x Old AT computer PSU
Using a pinout from the internet you can convert old floppy drives into stepper motor controllers - once converted they have 2 logic inputs, one for direction and one for stepping. I glued two small mirrors to the motors and Attached the motor driving boards to my microcontroller. Then with enough imagination and programming probably any number of designs and effects could be created for this system.
There are several major drawbacks to a system like this compared to real galvos. Stepper motors have a set "resolution" of sorts since they are only able to make a certain number of steps per revolution compared to galvos which move proportionally to the amplitude of an analog input signal. The second drawback is scanning speed. As you can see from the following pics when the scanning speed is increased the image begins to distort as the motors are unable to keep up with the scanning.
But heck, it's more fun than just a spirograph since you can do text and beamshows![Wink ;) ;)](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png)
Ok, onto the pictures
2x 5.25" Floppy drives - the kind with the nice stepper motors
1x Parallax BASIC Stamp II Microcontroller
1x Laser
2x Mirrors
1x Old AT computer PSU
Using a pinout from the internet you can convert old floppy drives into stepper motor controllers - once converted they have 2 logic inputs, one for direction and one for stepping. I glued two small mirrors to the motors and Attached the motor driving boards to my microcontroller. Then with enough imagination and programming probably any number of designs and effects could be created for this system.
There are several major drawbacks to a system like this compared to real galvos. Stepper motors have a set "resolution" of sorts since they are only able to make a certain number of steps per revolution compared to galvos which move proportionally to the amplitude of an analog input signal. The second drawback is scanning speed. As you can see from the following pics when the scanning speed is increased the image begins to distort as the motors are unable to keep up with the scanning.
But heck, it's more fun than just a spirograph since you can do text and beamshows
![Wink ;) ;)](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png)
Ok, onto the pictures