- Joined
- Mar 14, 2011
- Messages
- 2
- Points
- 0
Hello. I have a flex drive 5 that I am attempting to set with a rkcstr test load. I am confident in my soldering skills from other hobbies although this is the second laser driver I have dealt with and the first test load. I am using a 18650 battery and have the flex bridged for the ~450 - 1.1 range. When I read the mV on the test load with my meter in the 2000mV range I get a reading of 3. If I twist the potentiometer it will rise to 4. I am unsure why this is happening. I have done rigorous research for this project but have come to a problem I cannot understand. Thank you. -Michael