IsaacT
0
- Joined
- Aug 25, 2010
- Messages
- 5,947
- Points
- 83
EDIT: Driver Issue, got it figured out now!
Last edited:
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Figured out, no longer need help
- Thread starter IsaacT
- Start date
- Joined
- Oct 26, 2007
- Messages
- 5,438
- Points
- 83
Re: HELP!!!!! My 2.1A 9mm Build seems reluctant to burn
Hard to say unless you have other information such as how focused each beam/dot is, the actual measured output of each laser (not just apparent brightness), etc. Can you do some measurements on those factors?
Hard to say unless you have other information such as how focused each beam/dot is, the actual measured output of each laser (not just apparent brightness), etc. Can you do some measurements on those factors?
IsaacT
0
- Joined
- Aug 25, 2010
- Messages
- 5,947
- Points
- 83
Re: HELP!!!!! My 2.1A 9mm Build seems reluctant to burn
Unfortunately I have no LPM. I think I know what happened though now. I just went out to my garage and opened it up and it appears the X-Drive had some damage to it(not sure how). At any rate, I removed the module with the diode and soldered new leads on to it, connected the leads, and stored it in a bag.
Until I can get a new X-Drive I think I will just keep the diode there. And now I have an empty Ehgemus host just waiting to be filled.
Unfortunately I have no LPM. I think I know what happened though now. I just went out to my garage and opened it up and it appears the X-Drive had some damage to it(not sure how). At any rate, I removed the module with the diode and soldered new leads on to it, connected the leads, and stored it in a bag.
Until I can get a new X-Drive I think I will just keep the diode there. And now I have an empty Ehgemus host just waiting to be filled.
