Enough reading and searching ... Will this work?

[BChism]

First build and I'm hoping it will be a good and learning experience.

I'm in the think-tank and trying to finalize my build / parts decisions. Someone please correct any mistakes I have before I buy too much more stuff.

Here's the shopping list with a couple of enclosed questions:

- PHR-803T (Found a good deal so thought I'd try it)

- rkcstr "Micro-Drive" (bought it long time ago just to make sure I had it when I needed it)

- AixiZ module (Just basic optics and stuff for now to keep price down)

- HOST = http://www.dealextreme.com/details.dx/sku.4171 (Here is where the questions start.) Can I run the Micro-Drive mentioned above on the 2x 3.6v CR123s? Or do I need to get a form factor that will hold the 3x AAA like http://www.dealextreme.com/details.dx/sku.3405 in order to get the voltage up with the addition of the extra AAA cell?

Now the questions on batteries:

- Protected or non-protected
- Rechargable is ok, right?
- With each of the above mentioned hosts, there are so many different models of each battery size. I need recommendations as to exactly which model number to use or SKU on DX.

Any and all opinions or answers would be great.

Thanks again everyone for all of the great info. I'm sure in the next month or so, I'll be asking a couple more questions as I try this for the first time.

 

[rog8811]

Re: Enough reading and searching ... Will this wor

First items are fine, other than you are not showing a heatsink (maybe you are making your own).

- HOST = http://www.dealextreme.com/details.dx/sku.4171 (Here is where the questions start.) Can I run the Micro-Drive mentioned above on the 2x 3.6v CR123s? Or do I need to get a form factor that will hold the 3x AAA like http://www.dealextreme.com/details.dx/sku.3405 in order to get the voltage up with the addition of the extra AAA cell?

I have done it both ways, but with 3 X 10440 3.6v rechargables instead of AAA batteries as they won't give you enough voltage. Easiest is 2 X rcr123A in the MXDL host IMO.

Now the questions on batteries:

- Protected or non-protected
- Rechargable is ok, right?

Definately rechargables, protected or not is your choice, personally I use unprotected.

Regards rog8811

 

[john_lawson]

Re: Enough reading and searching ... Will this wor

two 3.6 batteries will work
i use unprotected -- surprised i havent caught somthing yet---lol
li-ion rechargables are fine i use two 10440 in my builds all the time


hope that helped

john

 

[john_lawson]

Re: Enough reading and searching ... Will this wor

wow Rog whered you come from lol you beat me to it ;D ;D ;D ;D

 

[BChism]

Re: Enough reading and searching ... Will this wor

First items are fine, other than you are not showing a heatsink (maybe you are making your own).

Yes, I will be making my own heatsink .. lol I'm a machinist. But thanks for noticing. I thought about adding that in the last edit.

I have done it both ways, but with 3 X 10440 3.6v rechargables instead of AAA batteries as they won't give you enough voltage. Easiest is 2 X rcr123A in the MXDL host IMO.

Ok, let me get this straight, just a little vague still. (And yes, I know ... I was saying "AAA" just for a size reference) 2x RCR123A will be enough input voltage for the RKCSTR driver to power a PHR-803T? Just making sure. I'm really wanting to use the MXDL 4171 from DX.

 

[rog8811]

Re: Enough reading and searching ... Will this wor

2x RCR123A will be enough input voltage for the RKCSTR driver to power a PHR-803T?

Those batteries are nominaly 3.6v, 2 of them will be right on the edge of the required voltage for the Rkcstr drive, the good thing is that fully charged they give around 4v so plenty of power, just keep them well charged.

I have a number of nominaly 7.2v builds and they work fine.

Regards rog8811