Ebay waterproof host

[luccax]

Waterproof Focusable Laser Torch Host for 12x60mm Module w H 450nm Glass Lens | eBay

I'm thinking about putting a A140 and x-drive at 1,25mA

I have no idea of how to build with this host, i don't even know if it comes with a heatsink or how big is the space to put the driver.

Have you ever built using this host? I asked them for more information about it but i'm sure someone at LPF has already tried it

 

[Flaminpyro]

It dose say 12 x 60 module that would indicate it's ready for a 12mm aixiz module I believe.

and the 12 x 60 part is the heat sink.

Buy one and make a review and then we will all know

 

[luccax]

Allright, i'll buy one and if i fail to build you help me

 

[jander6442]

High, I have a waterproof build from a rayfoss waterproof host its my daily driver. I also put a PHR together in one that will focus. It use the Aixiz module, I took of the end off and used the spring method... It actually pressed right in there very snug and it makes the whole host as a sink.

This one looks like it lacks that diameter needed for a press fit might need to do some machining the lens looks a little weak to be a good waterproof host just IMO.

 

[luccax]

What's the shape of the driver you're using? Is it a round one?

 

[jander6442]

What's the shape of the driver you're using? Is it a round one?

No way, I direct soldered to a flexV5 on that one.

 

[luccax]

Well, then I think my O-like driver with spring will work!